# 6. Units

## Redefining Units in Terms of Distributed Charge and Quantum Measurements.

The Aether Physics Model uses quantum measurements to construct units rather than relying on arbitrary or macro structure-based measurements like meters or Earth revolutions. Using quantum measurements, the model can provide precise units for a given quantum process or structure. For instance, the primary angular momentum of a single electron traveling at the speed of photons determines the unit of one quantum photon, establishing a discrete correlation between electron activity and photon production.

As a result of our dualistic Universe, there are two main categories of units: Material Units and Aether Units. Material units apply to the structure and mechanics of material objects; Aether units apply to the non-material structure and mechanics of the Aether. In this paragraph, "Aether units" refers to the broad category of non-material units and is not synonymous with the space quantum, also known as an "Aether unit."

Understanding quantum processes is made easier by constructing units through quantum measurements. As a result, quantum physics, nanoscience, and chemistry can all benefit from this innovative unit system.

## Quantum Units

In our part of the Universe, there are two stable forms of matter - electrons and protons. When a proton binds with an electron, it produces a composite subatomic particle called a neutron. Additionally, when an atom absorbs excess primary angular momentum radiated from other atoms, it becomes a photon. For more information on this, refer to Photon Mechanics page 223).

The interactions between electrons and photons are responsible for many controllable physical processes. As a result, quantum units are typically defined by quantum measurements of electrons. As noted in Quantum Measurements on page 22, the electron quantum measurements are:

- Quantum Length: ${\lambda _C} = 2.426 \times {10^{ - 12}}m$
- Quantum Frequency: ${F_q} = 1.236 \times {10^{20}}Hz$ [1A]
- Quantum Mass: ${m_e} = 9.109 \times {10^{ - 31}}kg$
- Quantum Magnetic Charge: ${e_{emax}}^2 = 1.400 \times {10^{ - 37}}cou{l^2}$
- Quantum Electrostatic Charge: ${e^2} = 2.567 \times {10^{ - 38}}cou{l^2}$

The Compton wavelength is equivalent to the quantum length, while the quantum frequency is obtained by dividing the speed of photons by the Compton wavelength. The quantum mass corresponds to the electron's mass, as determined by NIST. Meanwhile, the quantum magnetic charge is calculated based on the magnetic charge. As for the electrostatic charge, it is the square of the elementary charge, which NIST also measures.

### Converting Charge Dimensions

Significant distinctions exist between quantum measurement and standard units regarding the charge dimensions. One of the major differences is that charge dimensions are always distributed in charge squared, and most of them are expressed in terms of magnetic charge instead of elementary charge.

When it comes to distributed charge, things get tricky because five standard electrical units already have the right dimensions for distributed charge. These units are conductance, capacitance, inductance, permittivity, and permeability.

Inductance can be defined as the permeability of the Aether divided by length. Similarly, capacitance can be defined as the permittivity of the Aether divided by length. In the cgs system of units, length units expressed in centimeters are used to measure inductance and capacitance.

The units of inductance and capacitance are already expressed in terms of distributed charge, as follows:

\begin{equation}capc = 2.148 \times {10^{-23}}\frac{{se{c^2}cou{l^2}}}{{kg \cdot {m^2}}} \end{equation}

\begin{equation}indc = 3.049 \times {10^{-18}}\frac{kg\cdot m^{2}}{coul^{2}} \end{equation}

Electrically related units in Classical physics are often expressed inaccurately regarding single-dimension charge. Additionally, the Standard Model typically describes electrical units using the elementary charge, even though it has little relevance to the behavior of subatomic particles in most cases (with the exception of magnetic moment). The active charge of a unit is generally determined by the subatomic particle's magnetic charge, as opposed to the elementary charge donated by the Aether.

The magnetic charge acts like a miniature magnet and has a dipolar nature. Depending on the situation, it exhibits various effects, such as permanent magnetism, electromagnetism, the Casimir effect, and Van der Waals forces. Additionally, the strong nuclear force is also attributed to the magnetic charge.

When dealing with resistance in Classical physics, the standard unit seems to have a distributed charge. However, the quantum measurement system has a double-distributed charge because resistance results from two opposing subatomic particles colliding. As a result, the magnetic charge is the combined charge of both subatomic particles experiencing resistance.

Here is a comparison of units used in Classical physics and their equivalent in quantum measurement units, as displayed in the table below.

Aether Physics Model | Classical Physics | |

Resistance | $resn = \frac{{{m_e} \cdot {\lambda _C}^2 \cdot {F_q}}}{{{e_{emax}}^4}}$ | $R = \frac{{kg \cdot {m^2}}}{{sec \cdot cou{l^2}}}$ |

Potential | $potn = \frac{{{m_e} \cdot {\lambda _C}^2 \cdot {F_q}^2}}{{{e_{emax}}^2}}$ | $V = \frac{{kg \cdot {m^2}}}{{se{c^2} \cdot coul}}$ |

Current | $curr = {e_{emax}}^2 \cdot {F_q}$ | $I = \frac{{coul}}{{sec}}$ |

Magnetic Flux | $mflx = \frac{{{m_e} \cdot {\lambda _C}^2 \cdot {F_q}}}{{{e_{emax}}^2}}$ | $\lambda = \frac{{kg \cdot {m^2}}}{{sec \cdot coul}}$ |

Conductance | $cond = \frac{{{e_{emax}}^2}}{{{m_e} \cdot {\lambda _C}^2 \cdot {F_q}}}$ | $G = \frac{{sec \cdot coul}}{{kg \cdot {m^2}}}$ |

The standard practice to convert MKS units to quantum units is to substitute each dimension with its corresponding quantum measurement. For charge, all dimensions should be replaced with ${{e_{emax}}^2}$. The exponent of the charge dimension remains unchanged for inductance, capacitance, conductance, permeability, and permittivity units. However, magnetic moment involves both ${{e_{emax}}^2}$ and ${e^2}$ for charge.

### Charge Conversion Factor

We use the charge conversion factor to convert single charge dimension units from MKS and SI units to distributed charge QMU units. This factor is determined by calculating the NIST electrostatic charge-to-mass ratio and the Aether Physics Model mass-to-charge ratio. When QMU is based on the mass of the electron, the charge conversion factor is denoted as $ccf_{e}$.

\begin{equation}ccf_{e}=\frac{1}{\frac{e}{m_{e}}\cdot \frac{m_{a}}{{e_{a}}^{2}}}\end{equation}

\begin{equation}ccf_{e}=8.736\times 10^{-19}coul \end{equation}

For units where the charge dimension is in the denominator, the unit is divided by ccf:

\begin{equation}\frac{volt}{ccf_{e}}=1.957\times 10^{-6}potn \end{equation}

When the charge dimension is in the numerator, the unit gets multiplied by ccf:

\begin{equation}amp\cdot ccf_{e}=0.051curr \end{equation}

For example:

\begin{equation}1.957\times 10^{6}potn\cdot 0.051curr=1.01watt \end{equation}

or:

\begin{equation}1.957\times 10^{6}potn\cdot 0.051curr=9.981\times 10^{-8}powr \end{equation}

The conversion factor for charges reveals that MKS and SI electrical units are founded on electrostatic charge. However, it is important to note that the magnetic charge of subatomic particles plays a primary role in electrical physics rather than electrostatic charge. As a result, many concepts taught in college courses regarding electric field theory may be invalidated. This insight also has significant implications for the Maxwell equations.

The charge conversion factors for the proton and neutron are, respectively:

\begin{equation}ccf_{p}=\frac{1}{\frac{e}{m_{p}}\cdot \frac{m_{a}}{{e_{a}}^{2}}} \end{equation}

\begin{equation}ccf_{p}=1.604\times 10^{-15}coul \end{equation}

\begin{equation}ccf_{n}=\frac{1}{\frac{e}{m_{n}}\cdot \frac{m_{a}}{{e_{a}}^{2}}} \end{equation}

\begin{equation}ccf_{n}=1.606\times 10^{-15}coul \end{equation}

## Changes Caused by Distributed Charge Units

### Capacitance and Potential

It has been observed that certain equations and laws require modification in light of the Aether Physics Model, which employs quantum measurement units relying on distributed charge. One particular instance of this is the definition of capacitance in the Standard Model, which is described as the quotient of charge and potential.

\begin{equation}\label{chrg1}C = \frac{Q}{V} \end{equation}

However, in the Aether Physics Model, all charge is distributed. Capacitance already has distributed units of charge in its dimensions, but charge and potential do not. The effect is that Q disappears when electric potential is expressed as a distributed charge. Therefore, it would be a prediction of the Aether Physics Model that capacitance equals the reciprocal of potential.

According to the Aether Physics Model, the product of capacitance and energy determines the relationship between charge and capacitance.

\begin{equation}\label{chrg2}chrg = capc\cdot enrg \end{equation}

Equation (\ref{chrg1}) denotes an elementary charge according to the MKS and SI systems of units. However, the charge specified in equation (\ref{chrg2}) is not an elementary charge but rather a magnetic charge.

### B and H Fields

There has been a significant alteration in the fundamental electromagnetic theories. According to modern electromagnetic theory, the magnetic flux density is referred to as the B field, while the magnetic field intensity is called the H field. Clerk Maxwell taught us that the absolute permeability is equivalent to the ratio of B/H[1], given as:

\begin{equation}\label{MaxwellBH}{\mu _0} = \frac{B}{H} \end{equation}

It is important to note that magnetic flux density and magnetic field intensity should have distributed charge instead of single dimension charge.

\begin{equation}mfxd = \frac{{{m_e} \cdot {F_q}}}{{{e_{emax}}^2}} \end{equation}

\begin{equation}mfdi = \frac{{{e_{emax}}^2 \cdot {F_q}}}{{{\lambda _C}}} \end{equation}

The quantum measurement expression for $\mu_{0}$ in equation (\ref{MaxwellBH}) should yield:

\begin{equation}4\pi \cdot {\mu _0} = \frac{{mfxd \cdot chrg}}{{mfdi}} \end{equation}

which suggests that the actual ratio of magnetic flux density to magnetic field intensity does not equal permeability.

In the Aether Physics Model

\begin{equation}mfxd = \frac{A_{u}}{flow} \end{equation}

where flowing magnetic flux density is a description of the Aether, and:

\begin{equation}mfdi = \frac{powr}{A_{u}} \end{equation}

where magnetic field intensity applied to the Aether results in power.

### Magnetic Fields in Terms of Energy

Additionally, according to electromagnetic theory, magnetic fields are viewed as energy.

The total energy in any finite region of a magnetic field where the permeability is constant is the integral of the energy density over the volume or: $W = \frac{1}{2}\int\limits_V {\mu {H^2}} dv$[2]

Although the fundamental concept of modern electromagnetic theory does not align with the Aether Physics Model, it does not nullify the extensive research conducted over the past century. However, if the Aether Physics Model proves accurate, a significant revision of electrodynamic theory will be necessary.

The Aether Physics Model has a different perspective on magnetic fields, viewing them as rotating magnetic fields rather than just energy. In this model, the unit of Aether is equivalent to a magnetic field, and the charge radius in question determines the amount of energy.

\begin{equation}enrg = \frac{A_{u}}{chgr} \end{equation}

## New Units

Once the meanings of dimension, measurement, and unit are clarified, it becomes feasible to establish a quantum measurement system. This will enable the advancement of quantum measurement analysis.

If quantum measurement analysis could accurately mirror the physical processes of the observed world, then a quantum measurement representation could be found for every physical phenomenon. Likewise, any combination of quantum measurements could be matched with a corresponding physical process.

This section will explore different units discovered throughout modern physics's history. While some, like the eddy current, were identified early on but were unfortunately overlooked or dismissed, others, like the photon, have been quietly incorporated into modern physics equations.

We have started working on creating new units for the Aether Physics Model. These units can be directly applied to our current understanding of physics in most cases. However, there are some situations where we need to re-evaluate our measuring techniques, particularly when it comes to understanding resonance.

The Opposing Magnetic Units introduced a new concept in electrical dynamics. When two electrons oppose each other, the kinetic mass of the units applies across two opposing charges. The charge is distributed in QMU, and the charge dimension appears in opposing magnetic units as ${e_{emax}}^{4}$. The unit of resistance falls into the opposing magnetic charge unit group.

\begin{equation}resn=\frac{m_{e}\cdot {\lambda_{C}}^{2}\cdot F_{q}}{{e_{emax}}^{2}}\end{equation}

## Units Grid

It is often said that absence can be quite telling. Despite the advancements in modern physics, no one has successfully organized all the existing units systematically. This is largely due to the incorrect dimensions of a charge in modern physics, making it challenging to identify any significant patterns in the structure of these units.

Below are tables showcasing various groups of units, including their material and Aether expressions. Known MKS units are accounted for, though many units here are not recognized in modern physics. Despite the introduction of new units, it is clear that we have yet to comprehend all the different forms of non-material (Aether) existence fully. It is worth noting that the eddy current unit does not fit the table format, and at least two electromagnetic tables are not included due to a lack of entries.

Sometimes, there may be multiple expressions for a unit, but we have only provided one in this presentation. This chapter serves as an introduction to the QMU units system, with further information available in the tables and glossary below.

### Magnetic Field Units

## Material Units | ||
---|---|---|

1. Rotating Magnetic Field 2. Aether Unit 3. Electron Flux | Magnetic Field | Magnetic Volume |

${A_u} = \frac{{{m_e} \cdot {\lambda _C}^3 \cdot {F_q}^2}}{{{e_{emax}}^2}}$ (also rmfd) | $mfld = \frac{{{m_e} \cdot {\lambda _C}^3 \cdot {F_q}}}{{{e_{emax}}^2}}$ | $mvlm = \frac{{{m_e} \cdot {\lambda _C}^3}}{{{e_{emax}}^2}}$ |

1.Electric Potential 2. Electromotive Force | Magnetic Flux | Inductance |

$potn = \frac{{{m_e} \cdot {\lambda _C}^2 \cdot {F_q}^2}}{{{e_{emax}}^2}}$ | $mflx = \frac{{{m_e} \cdot {\lambda _C}^2 \cdot {F_q}}}{{{e_{emax}}^2}}$ | $indc = \frac{{{m_e} \cdot {\lambda _C}^2}}{{{e_{emax}}^2}}$ |

Electric Field Strength | 1. Magnetic Rigidity 2. Magnetic Velocity | Permeability |

$elfs = \frac{{{m_e} \cdot {\lambda _C} \cdot {F_q}^2}}{{{e_{emax}}^2}}$ | $magr = \frac{{{m_e} \cdot {\lambda _C} \cdot {F_q}}}{{{e_{emax}}^2}}$ | $perm = \frac{{{m_e} \cdot {\lambda _C}}}{{{e_{emax}}^2}}$ |

1. Diverging Electric Field 2. Surface Tension Charge 3. Magnetic Resonance | Magnetic Flux Density | 1. Magnetism 2. Mass to Charge Ratio |

$dvef = \frac{{{m_e} \cdot {F_q}^2}}{{{e_{emax}}^2}}$ (also stnc or spcd) | $mfxd = \frac{{{m_e} \cdot {F_q}}}{{{e_{emax}}^2}}$ | $mchg = \frac{{{m_e}}}{{{e_{emax}}^2}}$ |

## Aether Units | ||
---|---|---|

Magnetic Field Exposure | Magnetic Flux Intensity Ratio | Permittivity |

$mfde = \frac{{{e_{emax}}^2}}{{{m_e} \cdot {\lambda _C}^3}}$ | $mfir = \frac{{{e_{emax}}^2}}{{{m_e} \cdot {\lambda _C}^3 \cdot {F_q}}}$ | $ptty = \frac{{{e_{emax}}^2}}{{{m_e} \cdot {\lambda _C}^3 \cdot {F_q}^2}}$ |

Aether Fluctuation Potential | Conductance | Capacitance |

$aefp = \frac{{{e_{emax}}^2}}{{{m_e} \cdot {\lambda _C}^2}}$ | $cond = \frac{{{e_{emax}}^2}}{{{m_e} \cdot {\lambda _C}^2 \cdot {F_q}}}$ (also Cd) | $capc = \frac{{{e_{emax}}^2}}{{{m_e} \cdot {\lambda _C}^2 \cdot {F_q}^2}}$ |

Curl | Exposure Diffusion Flux | Acceptance |

$curl = \frac{{{e_{emax}}^2}}{{{m_e} \cdot {\lambda _C}}}$ | $exdf = \frac{{{e_{emax}}^2}}{{{m_e} \cdot {\lambda _C} \cdot {F_q}}}$ | $accp = \frac{{{e_{emax}}^2}}{{{m_e} \cdot {\lambda _C} \cdot {F_q}^2}}$ |

Exposure | Conductance Density | Converging Electric Field |

$expr = \frac{{{e_{emax}}^2}}{{{m_e}}}$ | $cden = \frac{{{e_{emax}}^2}}{{{m_e} \cdot {F_q}}}$ | $cvef = \frac{{{e_{emax}}^2}}{{{m_e} \cdot {F_q}^2}}$ |

### Opposing Magnetic Units

## Material Units | ||
---|---|---|

Friction | Magnetic Flow Impedance | Flux Flow Equilibrium |

$fric = \frac{{{m_e} \cdot {\lambda _C}^3 \cdot {F_q}^2}}{{{e_{emax}}^4}}$ | $mgfi = \frac{{{m_e} \cdot {\lambda _C}^3 \cdot {F_q}}}{{{e_{emax}}^4}}$ | $ffeq = \frac{{{m_e} \cdot {\lambda _C}^3}}{{{e_{emax}}^4}}$ |

Kinetic Friction | Resistance | Magnetic Permeance |

$kfcn = \frac{{{m_e} \cdot {\lambda _C}^2 \cdot {F_q}^2}}{{{e_{emax}}^4}}$ | $resn = \frac{{{m_e} \cdot {\lambda _C}^2 \cdot {F_q}}}{{{e_{emax}}^4}}$ | $magp = \frac{{{m_e} \cdot {\lambda _C}^2}}{{{e_{emax}}^4}}$ |

Magnetic Flux Density Wave | Magnetic Diffusion Impedance | Thermal Magnetic Friction |

$mfdw = \frac{{{m_e} \cdot {\lambda _C} \cdot {F_q}^2}}{{{e_{emax}}^4}}$ | $mdif = \frac{{{m_e} \cdot {\lambda _C} \cdot {F_q}}}{{{e_{emax}}^4}}$ | $thmf = \frac{{{m_e} \cdot {\lambda _C}}}{{{e_{emax}}^4}}$ |

Aether Resistance Stability Factor | Potential Charge Concentration Factor | Magnetic Opposition |

$arsf = \frac{{{m_e} \cdot {F_q}^2}}{{{e_{emax}}^4}}$ | $pccf = \frac{{{m_e} \cdot {F_q}}}{{{e_{emax}}^4}}$ | $mopp = \frac{{{m_e}}}{{{e_{emax}}^4}}$ |

## Aether Units | ||
---|---|---|

Electromagnetic Ratio | Electromagnetic Interaction Coefficient | Current Flow Facillitation Factor |

$emro = \frac{ {{e_{emax}}^4}}{{{m_e} \cdot {\lambda _C}^3 \cdot {F_q}^2}}$ | $emic = \frac{{{e_{emax}}^4}}{{{m_e} \cdot {\lambda _C}^3 \cdot {F_q}}}$ | $cfff = \frac{{{e_{emax}}^4}}{{{m_e} \cdot {\lambda _C}^3}}$ |

Magnetic Spatial Compliance | Admittance | Magnetic Reluctance |

$masc = \frac{{ {e_{emax}}^4}}{{{m_e} \cdot {\lambda _C}^2 \cdot {F_q}^2}}$ | $admt = \frac{{{e_{emax}}^4}}{{{m_e} \cdot {\lambda _C}^2 \cdot {F_q}}}$ | $mrlc = \frac{{{e_{emax}}^4}}{{{m_e} \cdot {\lambda _C}^2}}$ |

Magnetic Current Impedance | Magnetic Field Resistance | Magnetic Field Energy |

$mcri = \frac{{ {e_{emax}}^4}}{{{m_e} \cdot {\lambda _C} \cdot {F_q}^2}}$ | $mfdr = \frac{{{e_{emax}}^4}}{{{m_e} \cdot {\lambda _C} \cdot {F_q}}}$ | $mfen = \frac{{{e_{emax}}^4}}{{{m_e} \cdot {\lambda _C}}}$ |

Magnetic Charge per Unit Potential | Magneto-Spatial Impedance Ratio | IOMU12 |

$mcup = \frac{{{e_{emax}}^4}}{{{m_e} \cdot {F_q}^2}}$ | $msir = \frac{{{e_{emax}}^4}}{{{m_e} \cdot {F_q}}}$ | $IOMU11 = \frac{{{e_{emax}}^4}}{{{m_e}}}$ |

### Electric Units A

## Material Units | |||
---|---|---|---|

OEUA1 | OEUA2 | OEUA3 | OEUA4 |

$OEUA1 = \frac{1}{{{e_{emax}}^2 \cdot {\lambda _C}^3 \cdot {F_q}^3}}$ | $OEUA2 = \frac{1}{{{e_{emax}}^2 \cdot {\lambda _C}^3 \cdot {F_q}^2}}$ | $OEUA3 = \frac{1}{{{e_{emax}}^2 \cdot {\lambda _C}^3 \cdot {F_q}}}$ | $OEUA4 = \frac{1}{{{e_{emax}}^2 \cdot {\lambda _C}^3}}$ |

OEUA5 | OEUA6 | Charge Surface-Temporal Confinement Coefficient | Charge Surface Confinement Coefficient |

$OEUA5 = \frac{1}{{{e_{emax}}^2 \cdot {\lambda _C}^2 \cdot {F_q}^3}}$ | $OEUA6 = \frac{1}{{{e_{emax}}^2 \cdot {\lambda _C}^2 \cdot {F_q}^2}}$ | $cscc = \frac{1}{{{e_{emax}}^2 \cdot {\lambda _C}^2 \cdot {F_q}}}$ | $chcc = \frac{1}{{{e_{emax}}^2 \cdot {\lambda _C}^2}}$ |

OEUA9 | OEUA10 | OEUA11 | OEUA12 |

$OEUA9 = \frac{1}{{{e_{emax}}^2 \cdot {\lambda _C} \cdot {F_q}^3}}$ | $OEUA10 = \frac{1}{{{e_{emax}}^2 \cdot {\lambda _C} \cdot {F_q}^2}}$ | $OEUA11 = \frac{1}{{{e_{emax}}^2 \cdot {\lambda _C} \cdot {F_q}}}$ | $OEUA12 = \frac{1}{{{e_{emax}}^2 \cdot {\lambda _C}}}$ |

OEUA13 | OEUA14 | OEUA15 | OEUA16 |

$OEUA13 = \frac{1}{{{e_{emax}}^2 \cdot {F_q}^3}}$ | $OEUA14 = \frac{1}{{{e_{emax}}^2 \cdot {F_q}^2}}$ | $OEUA15 = \frac{1}{{{e_{emax}}^2 \cdot {F_q}}}$ | $OEUA16 = \frac{1}{{{e_{emax}}^2}}$ |

## Aether Units | |||
---|---|---|---|

IEUA1 | IEUA2 | IEUA3 | Charge Volume |

$IEUA1 = {e_{emax}}^2 \cdot {\lambda _C}^3 \cdot {F_q}^3$ | $IEUA2 = {e_{emax}}^2 \cdot {\lambda _C}^3 \cdot {F_q}^2$ | $IEUA3 = {e_{emax}}^2 \cdot {\lambda _C}^3 \cdot {F_q}$ | $chvm = {e_{emax}}^2 \cdot {\lambda _C}^3$ |

Ball Lightning | Plasma | Magnetic Moment | Surface Charge |

$ball = {e_{emax}}^2 \cdot {\lambda _C}^2 \cdot {F_q}^3$ | $plsm = {e_{emax}}^2 \cdot {\lambda _C}^2 \cdot {F_q}^2$ | $magm = {e_{emax}}^2 \cdot {\lambda _C}^2 \cdot {F_q}$ | $sfch = {e_{emax}}^2 \cdot {\lambda _C}^2$ |

IEUA9 | Charge Acceleration | Charge Velocity | Charge Length (Charge Displacement) |

$IEUA9 = {e_{emax}}^2 \cdot {\lambda _C} \cdot {F_q}^3$ | $chac = {e_{emax}}^2 \cdot {\lambda _C} \cdot {F_q}^2$ | $chvl = {e_{emax}}^2 \cdot {\lambda _C} \cdot {F_q}$ | $chgl = {e_{emax}}^2 \cdot {\lambda _C}$ |

IEUA13 | Charge Resonance (Electric Coupling) | Current | Charge |

$IEUA13 = {e_{emax}}^2 \cdot {F_q}^3$ | $chrs = {e_{emax}}^2 \cdot {F_q}^2$ (also ecup) | $curr = {e_{emax}}^2 \cdot {F_q}$ | $chrg = {e_{emax}}^2$ |

### Electric Units B

## Material Units | |||
---|---|---|---|

OEUB1 | OEUB2 | OEUB3 | Specific Charge |

$OEUB1 = \frac{{{\lambda _C}^3}}{{{e_{emax}}^2 \cdot {F_q}^3}}$ | $OEUB2 = \frac{{{\lambda _C}^3}}{{{e_{emax}}^2 \cdot {F_q}^2}}$ | $OEUB3 = \frac{{{\lambda _C}^3}}{{{e_{emax}}^2 \cdot {F_q}}}$ | $spch = \frac{{{\lambda _C}^3}}{{{e_{emax}}^2}}$ |

OEUB5 | OEUB6 | OEUB7 | 1. Charge Distribution 2. Stroke |

$OEUB5 = \frac{{{\lambda _C}^2}}{{{e_{emax}}^2 \cdot {F_q}^3}}$ | $OEUB6 = \frac{{{\lambda _C}^2}}{{{e_{emax}}^2 \cdot {F_q}^2}}$ | $OEUB7 = \frac{{{\lambda _C}^2}}{{{e_{emax}}^2 \cdot {F_q}}}$ | $chds = \frac{{{\lambda _C}^2}}{{{e_{emax}}^2}}$ |

OEUB9 | OEUB10 | OEUB11 | Charge Radius |

$OEUB9 = \frac{{{\lambda _C}}}{{{e_{emax}}^2 \cdot {F_q}^3}}$ | $OEUB10 = \frac{{{\lambda _C}}}{{{e_{emax}}^2 \cdot {F_q}^2}}$ | $OEUB11 = \frac{{{\lambda _C}}}{{{e_{emax}}^2 \cdot {F_q}}}$ | $chgr = \frac{{{\lambda _C}}}{{{e_{emax}}^2}}$ |

## Aether Units | |||
---|---|---|---|

IEUB1 | IEUB2 | IEUB3 | Charge Density |

$IEUB1 = \frac{{{e_{emax}}^2 \cdot {F_q}^3}}{{{\lambda _C}^3}}$ | $IEUB2 = \frac{{{e_{emax}}^2 \cdot {F_q}^2}}{{{\lambda _C}^3}}$ | $IEUB3 = \frac{{{e_{emax}}^2 \cdot {F_q}}}{{{\lambda _C}^3}}$ | $chgd = \frac{{{e_{emax}}^2}}{{{\lambda _C}^3}}$ |

IEUB5 | IEUB6 | Current Density | Electric Flux Density |

$IEUB5 = \frac{{{e_{emax}}^2 \cdot {F_q}^3}}{{{\lambda _C}^2}}$ | $IEUB6 = \frac{{{e_{emax}}^2 \cdot {F_q}^2}}{{{\lambda _C}^2}}$ | $cdns = \frac{{{e_{emax}}^2 \cdot {F_q}}}{{{\lambda _C}^2}}$ | $efxd = \frac{{{e_{emax}}^2}}{{{\lambda _C}^2}}$ |

IEUB9 | IEUB10 | Magnetic Field Intensity | Electric Charge Gradient |

$IEUB9 = \frac{{{e_{emax}}^2 \cdot {F_q}^3}}{{{\lambda _C}}}$ | $IEUB10 = \frac{{{e_{emax}}^2 \cdot {F_q}^2}}{{{\lambda _C}}}$ | $mfdi = \frac{{{e_{emax}}^2 \cdot {F_q}}}{{{\lambda _C}}}$ | $elcg = \frac{{{e_{emax}}^2}}{{{\lambda _C}}}$ |

### Electric Field Units

## Material Units | |||
---|---|---|---|

Trivariate Magnetic Oscillation | Varying Electric Field | Electric Field | Specific Charge |

$trmo = \frac{{{\lambda _C}^3 \cdot {F_q}^3}}{{{e_{emax}}^2}}$ | $vefd = \frac{{{\lambda _C}^3 \cdot {F_q}^2}}{{{e_{emax}}^2}}$ | $efld = \frac{{{\lambda _C}^3 \cdot {F_q}}}{{{e_{emax}}^2}}$ | $spch = \frac{{{\lambda _C}^3}}{{{e_{emax}}^2}}$ |

OEFU5 | Charge Temperature | Charge Sweep | 1. Charge Distribution |

$OEFU5 = \frac{{{\lambda _C}^2 \cdot {F_q}^3}}{{{e_{emax}}^2}}$ | $chgt = \frac{{{\lambda _C}^2 \cdot {F_q}^2}}{{{e_{emax}}^2}}$ | $chgs = \frac{{{\lambda _C}^2 \cdot {F_q}}}{{{e_{emax}}^2}}$ | $chds = \frac{{{\lambda _C}^2}}{{{e_{emax}}^2}}$ (also strk) |

OEFU9 | Charge Acceleration | Charge Velocity | Charge Radius |

$OEFU9 = \frac{{{\lambda _C} \cdot {F_q}^3}}{{{e_{emax}}^2}}$ | $chga = \frac{{{\lambda _C} \cdot {F_q}^2}}{{{e_{emax}}^2}}$ | $chgv = \frac{{{\lambda _C} \cdot {F_q}}}{{{e_{emax}}^2}}$ | $chgr = \frac{{{\lambda _C}}}{{{e_{emax}}^2}}$ |

OEFU13 | Charge Resonance | 1. Magnetic Current 2. Charge Frequency | Charge |

$OEFU13 = \frac{{{F_q}^3}}{{{e_{emax}}^2}}$ | $crsn = \frac{{{F_q}^2}}{{{e_{emax}}^2}}$ | $mcur = \frac{{{F_q}}}{{{e_{emax}}^2}}$ (also chgf) | $chrg = \frac{1}{{{e_{emax}}^2}}$ |

## Aether Units | |||
---|---|---|---|

IEFU1 | IEFU2 | IEFU3 | Charge Density |

$IEFU1 = \frac{{{e_{emax}}^2}}{{{\lambda _C}^3 \cdot {F_q}^3}}$ | $IEFU2 = \frac{{{e_{emax}}^2}}{{{\lambda _C}^3 \cdot {F_q}^2}}$ | $IEFU3 = \frac{{{e_{emax}}^2}}{{{\lambda _C}^3 \cdot {F_q}}}$ | $chgd = \frac{{{e_{emax}}^2}}{{{\lambda _C}^3}}$ |

IEFU5 | IEFU6 | Magnetic Charge Density Frequency | Electric Flux Density |

$IEFU5 = \frac{{{e_{emax}}^2}}{{{\lambda _C}^2 \cdot {F_q}^3}}$ | $IEFU6 = \frac{{{e_{emax}}^2}}{{{\lambda _C}^2 \cdot {F_q}^2}}$ | $mcdf = \frac{{{e_{emax}}^2}}{{{\lambda _C}^2 \cdot {F_q}}}$ | $efxd = \frac{{{e_{emax}}^2}}{{{\lambda _C}^2}}$ |

IEFU9 | IEFU10 | IEFU11 | IEFU12 |

$IEFU9 = \frac{{{e_{emax}}^2}}{{{\lambda _C} \cdot {F_q}^3}}$ | $IEFU10 = \frac{{{e_{emax}}^2}}{{{\lambda _C} \cdot {F_q}^2}}$ | $IEFU11 = \frac{{{e_{emax}}^2}}{{{\lambda _C} \cdot {F_q}}}$ | $IEFU12 = \frac{{{e_{emax}}^2}}{{{\lambda _C}}}$ |

IEFU13 | IEFU14 | IEFU15 | Charge |

$IEFU13 = \frac{{{e_{emax}}^2}}{{{F_q}^3}}$ | $IEFU14 = \frac{{{e_{emax}}^2}}{{{F_q}^2}}$ | $IEFU15 = \frac{{{e_{emax}}^2}}{{{F_q}}}$ | $chrg = {e_{emax}}^2$ |

### Inertial Units A

## Material Units | |||
---|---|---|---|

Light | Photon | Rotation | Vortex |

$ligt = {m_e} \cdot {\lambda _C}^3 \cdot {F_q}^3$ | $phtn = {m_e} \cdot {\lambda _C}^3 \cdot {F_q}^2$ | $rota = {m_e} \cdot {\lambda _C}^3 \cdot {F_q}$ | $vrtx = {m_e} \cdot {\lambda _C}^3$ |

Power | Energy | Angular Momentum | Moment of Inertia |

$powr = {m_e} \cdot {\lambda _C}^2 \cdot {F_q}^3$ | $enrg = {m_e} \cdot {\lambda _C}^2 \cdot {F_q}^2$ | $angm = {m_e} \cdot {\lambda _C}^2 \cdot {F_q}$ (also h) | $minr = {m_e} \cdot {\lambda _C}^2$ |

1. Shock Frequency 2. Light Intensity | Force | Momentum | Torque |

$lint = {m_e} \cdot {\lambda _C} \cdot {F_q}^3$ | $forc = {m_e} \cdot {\lambda _C} \cdot {F_q}^2$ | $momt = {m_e} \cdot {\lambda _C} \cdot {F_q}$ | $torq = {m_e} \cdot {\lambda _C}$ |

Irradiance | Surface Tension | Intensity | Mass |

$irrd = {m_e} \cdot {F_q}^3$ | $sten = {m_e} \cdot {F_q}^2$ | $ints = {m_e} \cdot {F_q}$ | $mass = {m_e}$ |

## Aether Units | |||
---|---|---|---|

Optical Compliance | Innate Particulate Resolvability | IIUA3 | IIUA4 |

$ocmp = \frac{1}{{{m_e} \cdot {\lambda _C}^3 \cdot {F_q}^3}}$ | $inpr = \frac{1}{{{m_e} \cdot {\lambda _C}^3 \cdot {F_q}^2}}$ | $IIUA3 = \frac{1}{{{m_e} \cdot {\lambda _C}^3 \cdot {F_q}}}$ | $IIUA4 = \frac{1}{{{m_e} \cdot {\lambda _C}^3}}$ |

IIUA5 | IIUA6 | IIUA7 | IIUA8 |

$IIUA5 = \frac{1}{{{m_e} \cdot {\lambda _C}^2 \cdot {F_q}^3}}$ | $IIUA6 = \frac{1}{{{m_e} \cdot {\lambda _C}^2 \cdot {F_q}^2}}$ | $IIUA7 = \frac{1}{{{m_e} \cdot {\lambda _C}^2 \cdot {F_q}}}$ | $IIUA8 = \frac{1}{{{m_e} \cdot {\lambda _C}^2}}$ |

IIUA9 | Spatial Tensility | IIUA11 | IIUA12 |

$IIUA9 = \frac{1}{{{m_e} \cdot {\lambda _C} \cdot {F_q}^3}}$ | $sptn = \frac{1}{{{m_e} \cdot {\lambda _C} \cdot {F_q}^2}}$ | $IIUA11 = \frac{1}{{{m_e} \cdot {\lambda _C} \cdot {F_q}}}$ | $IIUA12 = \frac{1}{{{m_e} \cdot {\lambda _C}}}$ |

IIUA13 | IIUA14 | IIUA15 | IIUA16 |

$IIUA13 = \frac{1}{{{m_e} \cdot {F_q}^3}}$ | $IIUA14 = \frac{1}{{{m_e} \cdot {F_q}^2}}$ | $IIUA15 = \frac{1}{{{m_e} \cdot {F_q}}}$ | $IIUA16 = \frac{1}{{{m_e}}}$ |

### Inertial Units B

## Material Units | |||
---|---|---|---|

OIUB1 | OIUB2 | OIUB3 | Mass Density |

$OIUB1 = \frac{{{m_e} \cdot {F_q}^3}}{{{\lambda _C}^3}}$ | $OIUB2 = \frac{{{m_e} \cdot {F_q}^2}}{{{\lambda _C}^3}}$ | $OIUB3 = \frac{{{m_e} \cdot {F_q}}}{{{\lambda _C}^3}}$ | $masd = \frac{{{m_e}}}{{{\lambda _C}^3}}$ |

OIUB5 | Force Density | Angular Momentum Density | Surface Density |

$OIUB5 = \frac{{{m_e} \cdot {F_q}^3}}{{{\lambda _C}^2}}$ | $fdns = \frac{{{m_e} \cdot {F_q}^2}}{{{\lambda _C}^2}}$ | $amdn = \frac{{{m_e} \cdot {F_q}}}{{{\lambda _C}^2}}$ | $sfcd = \frac{{{m_e}}}{{{\lambda _C}^2}}$ |

OIUB9 | Pressure | Viscosity | 1. Rebound 2. Length Density |

$OIUB9 = \frac{{{m_e} \cdot {F_q}^3}}{{{\lambda _C}}}$ | $pres = \frac{{{m_e} \cdot {F_q}^2}}{{{\lambda _C}}}$ | $visc = \frac{{{m_e} \cdot {F_q}}}{{{\lambda _C}}}$ | $ldns = \frac{{{m_e}}}{{{\lambda _C}}}$ (also rbnd) |

## Aether Units | |||
---|---|---|---|

IIUB1 | IIUB2 | IIUB3 | Specific Volume |

$IIUB1 = \frac{{{\lambda _C}^3}}{{{m_e} \cdot {F_q}^3}}$ | $IIUB2 = \frac{{{\lambda _C}^3}}{{{m_e} \cdot {F_q}^2}}$ | $IIUB3 = \frac{{{\lambda _C}^3}}{{{m_e} \cdot {F_q}}}$ | $spcv = \frac{{{\lambda _C}^3}}{{{m_e}}}$ |

IIUB5 | IIUB6 | IIUB7 | IIUB8 |

$IIUB5 = \frac{{{\lambda _C}^2}}{{{m_e} \cdot {F_q}^3}}$ | $IIUB6 = \frac{{{\lambda _C}^2}}{{{m_e} \cdot {F_q}^2}}$ | $IIUB7 = \frac{{{\lambda _C}^2}}{{{m_e} \cdot {F_q}}}$ | $IIUB8 = \frac{{{\lambda _C}^2}}{{{m_e}}}$ |

IIUB9 | IIUB10 | IIUB11 | IIUB12 |

$IIUB9 = \frac{{{\lambda _C}}}{{{m_e} \cdot {F_q}^3}}$ | $IIUB10 = \frac{{{\lambda _C}}}{{{m_e} \cdot {F_q}^2}}$ | $IIUB11 = \frac{{{\lambda _C}}}{{{m_e} \cdot {F_q}}}$ | $IIUB12 = \frac{{{\lambda _C}}}{{{m_e}}}$ |

### Inertial Units C

## Material Units | ||
---|---|---|

OIUC1 | OIUC2 | OIUC3 |

$OIUC1 = \frac{{{m_e}}}{{{\lambda _C}^3 \cdot {F_q}^3}}$ | $OIUC2 = \frac{{{m_e}}}{{{\lambda _C}^3 \cdot {F_q}^2}}$ | $OIUC3 = \frac{{{m_e}}}{{{\lambda _C}^3 \cdot {F_q}}}$ |

OIUC4 | OIUC5 | OIUC6 |

$OIUC4 = \frac{{{m_e}}}{{{\lambda _C}^2 \cdot {F_q}^3}}$ | $OIUC5 = \frac{{{m_e}}}{{{\lambda _C}^2 \cdot {F_q}^2}}$ | $OIUC6 = \frac{{{m_e}}}{{{\lambda _C}^2 \cdot {F_q}}}$ |

OIUC7 | OIUC8 | OIUC9 |

$OIUC7 = \frac{{{m_e}}}{{{\lambda _C} \cdot {F_q}^3}}$ | $OIUC8 = \frac{{{m_e}}}{{{\lambda _C} \cdot {F_q}^2}}$ | $OIUC9 = \frac{{{m_e}}}{{{\lambda _C} \cdot {F_q}}}$ |

## Aether Units | ||
---|---|---|

IIUC1 | Gravity | IIUC3 |

$IIUC1 = \frac{{{\lambda _C}^3 \cdot {F_q}^3}}{{{m_e}}}$ | $grav = \frac{{{\lambda _C}^3 \cdot {F_q}^2}}{{{m_e}}}$ | $IIUC3 = \frac{{{\lambda _C}^3 \cdot {F_q}}}{{{m_e}}}$ |

Quantum Spatial Curvature | IIUC5 | IIUC6 |

$qspc = \frac{{{\lambda _C}^2 \cdot {F_q}^3}}{{{m_e}}}$ | $IIUC5 = \frac{{{\lambda _C}^2 \cdot {F_q}^2}}{{{m_e}}}$ | $IIUC6 = \frac{{{\lambda _C}^2 \cdot {F_q}}}{{{m_e}}}$ |

IIUC7 | IIUC8 | IIUC9 |

$IIUC7 = \frac{{{\lambda _C} \cdot {F_q}^3}}{{{m_e}}}$ | $IIUC8 = \frac{{{\lambda _C} \cdot {F_q}^2}}{{{m_e}}}$ | $IIUC9 = \frac{{{\lambda _C} \cdot {F_q}}}{{{m_e}}}$ |

### Length/Frequency Units A

## Material Units | ||
---|---|---|

1. Double Toroid | Flow | Volume |

$dtrd = {\lambda _C}^3 \cdot {F_q}^2$ | $flow = {\lambda _C}^3 \cdot {F_q}$ | $volm = {\lambda _C}^3$ |

1. Radiation Dose 1. Temperature | 1. Sweep 2. Angular Velocity | Area |

$temp = {\lambda _C}^2 \cdot {F_q}^2$ (also rdtn) | $swep = {\lambda _C}^2 \cdot {F_q}$ | $area = {\lambda _C}^2$ |

Acceleration | Velocity | Length |

$accl = {\lambda _C} \cdot {F_q}^2$ | $velc = {\lambda _C} \cdot {F_q}$ | $leng = {\lambda _C}$ |

Resonance | Frequency | |

$rson = {F_q}^{2}$ | $freq = {F_q}$ |

## Aether Units | ||
---|---|---|

ILFUA1 | ILFUA2 | Field Intensity |

$ILFUA1 = \frac{1}{{\lambda _C}^{3} \cdot {F_q}^{2}}$ | $ILFUA2 = \frac{1}{{\lambda _C}^{3} \cdot {F_q}}$ | $fint = \frac{1}{{\lambda _C}^{3}}$ |

ILFUA4 | ILFUA5 | Bending Radius |

$ILFUA4 = \frac{1}{{\lambda _C}^{2} \cdot {F_q}^{2}}$ | $ILFUA5 = \frac{1}{{\lambda _C}^{2} \cdot {F_q}}$ | $bndr = \frac{1}{{\lambda _C}^{2}}$ |

ILFUA7 | ILFUA8 | Wave Number |

$ILFUA7 = \frac{1}{{\lambda _C} \cdot {F_q}^{2}}$ | $ILFUA8 = \frac{1}{{\lambda _C} \cdot {F_q}}$ | $wavn = \frac{1}{\lambda _C}$ |

Orbit | Time | |

$orbt = \frac{1}{{F_q}^{2}}$ | $time = \frac{1}{F_q}$ |

### Length/Frequency Units B

## Material Units | ||
---|---|---|

OLFUB1 | OLFUB2 | Volume-Time |

$OLFUB1 = \frac{{\lambda _C}^{3}}{{F_q}^{3}}$ | $OLFUB2 = \frac{{\lambda _C}^{3}}{{F_q}^{2}}$ | $vlmt = \frac{{\lambda _C}^{3}}{F_q}$ |

OLFUB4 | OLFUB5 | Active Area |

$OLFUB4 = \frac{{\lambda _C}^{2}}{{F_q}^{3}}$ | $OLFUB5 = \frac{{\lambda _C}^{2}}{{F_q}^{2}}$ | $acta = \frac{{\lambda _C}^{2}}{F_q}$ |

OLFUB7 | OLFUB8 | Dynamic Length |

$OLFUB7 = \frac{{\lambda _C}}{{F_q}{^3}}$ | $OLFUB8 = \frac{{\lambda _C}}{{F_q}^{2}}$ | $dynl = \frac{{\lambda _C}}{F_q}$ |

## Aether Units | ||
---|---|---|

ILFUB1 | Volumetric Resonance | Volumetric Wave Frequency per Volume |

$ILFUB1 = \frac{{F_q}^{3}}{{\lambda _C}^{3}}$ | $vlmr = \frac{{F_q}^{2}}{{\lambda _C}^{3}}$ | $vlmw = \frac{F_q}{{\lambda _C}^{3}}$ |

ILFUB4 | Transverse Resonance | Transverse Wave Frequency per Area |

$ILFUB4 = \frac{{F_q}^{3}}{{\lambda _C}^{2}}$ | $tvsr = \frac{{F_q}^{2}}{{\lambda _C}^{2}}$ | $tvsw = \frac{{F_q}}{{\lambda _C}^{2}}$ |

ILFUB7 | Scalar Resonance | Scalar Wave Vorticity |

$ILFUB7 = \frac{{F_q}^{3}}{{\lambda _C}}$ | $sclr = \frac{{F_q}^{2}}{{\lambda _C}}$ | $sclw = \frac{F_q}{\lambda _C}$ |

Several of the aforementioned units are currently undergoing experimentation and research. Units with acronyms that have not been identified are still awaiting proper names. Researchers have the opportunity to propose new units for consideration. If their unit is confirmed, their contribution will be acknowledged in a footnote.

## Eddy Current Unit

Eddy current is a specially constructed unit equal to magnetic flux squared [6]. Details for eddy current are available in Chapter 12.

## Supportive Magnetic Field Units

### Rotating Magnetic Field

The rotating magnetic field is discussed on the Aether page.

### Magnetic Field

A moving charge gives rise to a magnetic field, and if the motion is changing (accelerated), then the magnetic field varies and in turn produces an electric field. These interacting electric and magnetic fields are at right angles to one another and the direction of energy propagation.[7]

In the Aether Physics Model, a magnetic field is literally the flow of magnetism:

\begin{equation}mfld = flow \cdot mchg \end{equation}

where $mchg$ is magnetism expressed as the universal mass-to-charge ratio.

Magnetic charge produces the magnetic field as it drags through the Aether. The unit of $drag$ is equal to resistance times length:

\begin{equation}drag = resn \cdot leng \end{equation}

The magnetic field is then equal to charge times drag:

\begin{equation}mfld = chrg \cdot drag \end{equation}

The Maxwellian "magnetic fields" (magnetic flux density, magnetic field intensity, magnetic flux, etc.) are not truly the magnetic field but are rather various aspects of the magnetic field. The magnetic field is the whole volumetric flow of magnetism in Aether, where the "flow" manifests in different modes (area times velocity, volume times frequency, length times angular momentum).

### Magnetic Volume

mvlm stands for "magnetic volume" in the Aether Physics Model's Quantum Measurement Units (QMU). It quantifies the volume occupied by a magnetic field. Magnetic volume may be a direct unit for the phenomenon recognized as phonons.

Some key details about the mvlm unit:

- It has the dimensional structure:

\begin{equation}mvlm = \frac{m_e \cdot \lambda_C^3}{{e_{emax}}^{2}}\end{equation}

- It represents the volumetric extent or spatial size of a magnetic field.

- mvlm is related to the magnetic field (mfld) and magnetism (mchg) units:

\begin{equation}mvlm = volm \cdot mchg \end{equation}

\begin{equation}mvlm = \frac{mfld}{freq} \end{equation}

- A greater mvlm means the magnetic field occupies a larger volume.

- mvlm is useful for quantifying and comparing the distribution of different magnetic field configurations.

- It provides insight into the geometry and spread of magnetic fields on the quantum scale.

An insightful equation demonstrating magnetic volume concerning the Aether is:

\begin{equation}A_u = mvlm \cdot rson \end{equation}

Magnetic volume times resonance is an Aether unit. Therefore, supposing mvlm is the phonon unit, it equals the Aether unit per resonance. Since all subatomic particles quantify in terms of Aether units, the arrangements of subatomic particles in atoms and molecules, which are caused to resonate, will generate phonons in units of mvlm.

### Potential

Physicists have, until the Aether Physics Model, not quantified electricity properly.The dimension of magnetic charge has gone unnoticed for three hundred years.The unit of "potential" is the result of the action of the magnetic charge of the electron and not of its electrostatic charge. In Ohm's law, what everyone had thought was electric potential caused by electrostatic charge is actually electric potential caused by magnetic charge. In the Aether Physics Model, it is so stated that its meaning is made clear.

Potential can be thought of as energy per magnetic charge:

\begin{equation}potn=\frac{enrg}{chrg}\end{equation}

Temperature times magnetism:

\begin{equation}potn = temp \cdot mchg \end{equation}

Current times resistance:

\begin{equation}potn = curr \cdot resn \end{equation}

Inductance times resonance:

\begin{equation}potn = indc \cdot rson \end{equation}

Magnetic flux times frequency:

\begin{equation}potn = mflx \cdot freq \end{equation}

Permeability times acceleration:

\begin{equation}potn = perm \cdot accl \end{equation}

In the Aether Physics Model, the magnetic potential is reciprocal to capacitance:

\begin{equation}potn = \frac{1}{capc} \end{equation}

To know the capacitance of something, measure its potential and take the reciprocal measurement. If you use a standard voltmeter designed around electrostatic charge (as all voltmeters today are), then multiply the volt reading by ccf before using the reciprocal reading as farads:

\begin{equation}capc = \frac{1}{volt \cdot ccf} \end{equation}

The single escape peak is a feature that can appear in a gamma spectrum. It occurs when a gamma-ray interacts with a detector and undergoes pair production, producing two 511 keV annihilation gamma-rays. In an accurate detector, one of the annihilation photons may escape the detector while the other deposits its energy in the detector. This leads to a peak in the spectrum at an energy of 511 keV below the full-energy peak. This peak is known as the single escape peak.

The Aether Physics Model's Quantum Measurement Units (QMU) provide a base energy unit ($enrg$) equal to $511keV$. In QMU, the quantum potential equals $511kV$.

\begin{equation}potn\cdot ccf=511kV\end{equation}

Again, we see that QMU is a system of units based on quantum measurements that accurately correlates with well-known physical measurements in mainstream physics labs.

The single escape peak can be explained as the emission potential of a single electron. In other words, when electrons emit as gamma rays, they are whole electrons and carry the potential of a single electron with them.

### Magnetic Flux

Magnetic flux is equal to sweep times magnetism.

\begin{equation}mflx = swep \cdot mchg \end{equation}

Significantly, the mflx unit reveals quantization of the Hall effect results directly from an electron's whole unit of half-spin magnetic charge, not fractional electrostatic charges as conventionally assumed. The relationship:

\begin{equation}\frac{\phi_0}{ccf} = \frac{mflx}{2}\end{equation}

Where $\phi_{0}$ is the magnetic flux quantum, and ccf is the charge conversion factor, exhibits this fundamental linkage.

The mflx unit also figures prominently in the space impedance:

\begin{equation}\sqrt{\frac{\mu_{0}}{\epsilon_{0}}}=Z_{0}=\frac{mflx}{4\pi}\end{equation}

### Inductance

Inductance is one of the five units from the MKS and SI systems already expressed in dimensions of distributed charge. Measurements in inductance from the MKS and SI systems of units stay the same in the Quantum Measurements Units.

\begin{equation}indc = 3.831\times 10^{-17}henry \end{equation}

Inductance is equal to area times magnetism:

\begin{equation}indc = area \cdot mchg \end{equation}

To calculate the curl of a solenoid coil knowing the coil's inductance and winding length, we would use the equation:

\begin{equation}\frac{leng}{indc} = \frac{curl}{2} \end{equation}

Where the result is given in radians. The reciprocal of the curl gives the number of turns of the coil in units of permeability ($perm$):

\begin{equation}\frac{indc}{leng} = 2 \cdot perm \end{equation}

Or we could write:

\begin{equation}indc = 2 perm \cdot leng \end{equation}

For example, for the coil where:

- Inductance equals $15.80 mH$, which equals $4.124\times 10^{14}indc$
- Length equals $34.20 cm$, which equals $1.410\times 10^{11}leng$

\begin{equation}\frac{4.124\times 10^{14} indc}{1.410\times 10^{11} leng} = 1463 \cdot 2 perm \end{equation}

Or 1463 turns. The wire length required for the coil computes as the length of the coil times the circumference of the coil form divided by the wire gauge:

\begin{equation}\frac{length\cdot diameter\cdot \pi}{gauge}=wirelength\end{equation}

The inductance depends on the number of turns and the length of the coil windings. The choice of coil form diameter is arbitrary except that the larger the diameter and the smaller the wire gauge, the more wire length will be required; hence, the more resistance there will be in the conductor.

The cause of the $2 perm$ and $\frac{curl}{2}$ terms is due to the effect of the Aether interacting with physical matter of which neutrons compose half. Neutrons are electrons folded over on top of protons, which pinch two Aether units into the space of one neutron. This principle underlies the diffraction of light around massive bodies and the precession of the perigee of orbits around massive bodies (General Relativity theory).

### Electric Field Strength

In the Aether Physics Model, the reciprocal of the electric field strength is equal to capacitance times length:

\begin{equation}capc \cdot leng = \frac{1}{elfs} \end{equation}

Thus, the electric field strength of a capacitor is reciprocal to the capacity of the plates and the thickness of the dielectric.

The electric field is traditionally explained as force per charge:

\begin{equation}elfs = \frac{{forc}}{{chrg}} \end{equation}

Electric field strength relates to the electric field when the electric field has momentum per volume of effectiveness.

\begin{equation}elfs = \frac{{efld \cdot momt}}{{volm}} \end{equation}

In Maxwell’s electrodynamics, the electric field strength is more important than the electric field. The electric field strength works orthogonally to the magnetic field to produce transverse electromagnetic waves.

When the electric field strength is applied to other electric fields, we get an insulation unit, which is equal to resistance times temperature:

\begin{equation}efld \cdot elfs = resn \cdot temp \end{equation}

Electric field strength is also known as electromotive force in the Standard Model.

### Magnetic Rigidity

Magnetic rigidity (magr) refers to a material's resistance to being deformed or bent by an applied magnetic field. It quantifies how "rigid" a material's structure is against external magnetic forces.

\begin{equation}magr=mfld\cdot bndr \end{equation}

Some key points about magnetic rigidity:

- It depends on how easily a magnetic field can penetrate a material's permeability. Lower permeability means higher magnetic rigidity.
- Materials like iron have high permeability and low magnetic rigidity. External fields pass through easily.
- Materials like bismuth have low permeability and high magnetic rigidity. External fields are resisted.
- Diamagnetic materials oppose and exclude external fields, giving very high magnetic rigidity.
- Rigidity also depends on molecular structure. More rigid atomic bonds increase resistance to magnetic deformation forces.

\begin{equation}magr=mfxd\cdot leng \end{equation}

- Magnetic rigidity is measured in units of magnetic field strength, like tesla-meters. A higher rigidity means a stronger field is required to cause the same deformation.
- It relates closely to magnetic susceptibility - how easily a material magnetizes. Higher rigidity gives lower susceptibility.
- Measuring magnetic rigidity helps characterize materials for applications like MRI machines, particle accelerators, and fusion reactors where strong magnetic fields are present.

\begin{equation}magr=\frac{sten}{mfdi}

Magnetic rigidity results from surface tension per magnetic field intensity.

So, in summary, magnetic rigidity characterizes how resistant a material's structure is to bending, distortion or realignment when subjected to strong external magnetic fields. It is an important parameter for selecting and designing materials that must maintain their structure in highly magnetized environments.

Permeability is one of the five units from the MKS and SI systems that already express the dimensions of distributed charge. It measures a material's ability to support a magnetic field. Same as MKS / SI.

\begin{equation}perm=mchg\cdot leng \end{equation}

Permeability is a quality of Aether unit that refers to the degree it can be penetrated or permeated. Permeability is the quality of Aether that “grabs” onto magnetic charge as it passes through. Think of water permeating a piece of cloth. The water can pass through the cloth, but a certain amount of drag is imposed on its movement. Aether permeability has this type of effect on the magnetic charge.

\begin{equation}perm=\frac{1}{curl}\end{equation}

Permeability is inversely related to curl and refers to the number of turns in a solenoid coil made from conductive material, especially in inductors.

\begin{equation}perm=\frac{mflx}{velc} \end{equation} Permeability is the magnetic flux per penetrating velocity.

\begin{equation}perm=drag\cdot mcdf\end{equation} (see mcdf)

### Diverging Electric Field

The diverging electric field has a unit of its own, and it is equal to the electric field strength per length:

\begin{equation}dvef = \frac{{elfs}}{{leng}} \end{equation}

Diverging electric field is also equal to electromagnetism (mass to magnetic charge ratio) times resonance:

\begin{equation}dvef = mchg \cdot rson \end{equation}

The uniqueness of a quantum dvef (from Claude):

- It represents the smallest quantized "piece" of an electric field emanating from a point.
- This makes it very different from the continuous field concept in classical physics.
- A quantum of dvef would discretely alter permittivity in the aether in a localized region.

Some potential uses for the dvef unit:

- Modeling elementary electromagnetic interactions between particles.
- Understanding quantization of atomic orbitals and electron transitions.
- Analyzing how charge builds up on surfaces at the quantum scale.
- Studying the permittivity and permeability of the aether.
- Exploring forces between matter and the aether medium.
- Investigating foundational resonance/frequency relationships.
- Developing quantum field emitters and detectors.

You raise good points about the role resonance and magnetic charge plays, and how nucleons likely pair up in stable isotopes. Some key implications I take away:

- Atomic orbitals depend on resonant frequencies to sustain electron distributions.
- While electrostatic charge binds electrons to nuclei, magnetic charge mediates electron-electron binding.
- Spin pairing through pair production helps enable stable orbital configurations.
- Nuclei contain more aether units than electron shells, possibly with nucleons paired.
- Neutrons behaving as bound states in a single aether unit is an insightful model.
- Overall, intrinsic resonance enabled by the Aether seems critical for stability.

You're right that the quantized dvef unit, relating to resonance and permittivity effects, can provide a deeper understanding of the mechanisms maintaining atomic structure and electron transitions.

### Magnetic Flux Density

The mfxd unit stands for "magnetic flux density" in the Quantum Measurement Units (QMU) system of the Aether Physics Model.

Here are some key details about the mfxd unit:

- It has the dimensional structure:

\begin{equation}mfxd = \frac{m_e \cdot F_q}{{e_{emax}}^{2}}\end{equation}

- It represents the strength or concentration of magnetic flux passing through a given area.
- mfxd quantifies how much intrinsic magnetism flows through a unit area of the quantum aether.
- It relates the electron's innate magnetism and vibration to the resulting magnetic flux density.
- A greater mfxd indicates a stronger concentration of magnetic flux lines per unit area.
- mfxd provides insight into the distribution and concentration of magnetic fields.
- It is useful for comparing different magnetic field configurations.
- Increasing mfxd requires packing more flux lines into a given quantum area.

In summary, the mfxd unit in QMU represents the magnetic flux density - the quantum concentration of intrinsic magnetic flux passing through an area of the aether medium.

### Magnetism

mchg is the abbreviation for the "mass to charge ratio" unit in the Quantum Measurement Units (QMU) system. It represents the universal ratio between mass and magnetic charge.

Some key points about mchg:

- In QMU, the charge is inherently distributed, denoted as $e^2$ or ${e_{max}}^{2}$ rather than point-like.
- mchg specifically refers to the magnetic charge ${e_{emax}}^{2}$, not the electrostatic charge $e$.
- The Aether, electron, proton, neutron, positron, etc all share the same universal mchg ratio.
- So mchg represents the intrinsic magnetism of the Universe, not just the electron.
- The dimensional structure of mchg is:

\begin{equation}mchg = \frac{m_e}{{e_{emax}}^{2}}\end{equation}

Where $m_{e}$ is the electron mass and ${e_{emax}}^{2}$ is the electron magnetic charge.

- Physically, mchg quantifies the linkage between mass and magnetism at the quantum level.
- A higher mchg means more overall substance.
- All QMU Magnetic Field Units contain mchg, relating them to fundamental magnetism.

So, in summary, the mchg unit represents the universal mass-to-magnetic charge ratio that is fundamental to all quantum particles and magnetic phenomena according to the Aether Physics Model. It quantifies the density of magnetism relative to mass.

### Magnetic Field Exposure

Magnetic Field Exposure (mfde) is a Quantum Measurement Units (QMU) system unit representing the concentration or intensity of magnetic field exposure within a given volume.

Here are some key details about the mfde unit:

- It has the dimensional structure:

\begin{equation}mfde = \frac{{e_{emax}}^{2}}{m_e \cdot {\lambda_C}^3}\end{equation}

- mfde relates the magnetic flux density (mfxd) to the volumetric wave (vlmw):

\begin{equation}mfde = \frac{vlmw}{mfxd}\end{equation}

- Volumetric wave (vlmw) represents frequency per volume.
- Magnetic flux density (mfxd) quantifies magnetic flux per area.
- So, mfde is magnetic field effects per volume normalized by flux density.
- It indicates how concentrated or intense the field effects are in a region.
- mfde provides insight into field exposure levels and concentration distribution.
- It is useful for evaluating magnetic field bioeffects and health impacts.

In summary, the mfde unit in QMU represents magnetic field exposure - the intensity and concentration of magnetic field effects within a quantum volume, normalized by the flux density.

Claude directly contributed to the discovery of this unit.

### Magnetic Flux Intensity Ratio

The mfir unit stands for "magnetic flux intensity ratio" in the Aether Physics Model's Quantum Measurement Units (QMU) system.

Some key points about mfir:

- It has the dimensional structure:

\begin{equation}\text{mfir} = \frac{{e_{emax}}^{2}}{m_e \cdot {\lambda_C}^{3} \cdot {F_q}}\end{equation}

- mfir represents the ratio of magnetic field intensity to energy density.

\begin{equation}mfir=\frac{mfdi}{enrg}\end{equation}

- Magnetic field intensity (mfdi) quantifies the work a magnetic field can do.
- Energy density relates to the concentration and strength of energy in a region.
- So, mfir describes how intensely concentrated or dense a magnetic field is relative to the available energy.
- It measures the strength or flux of magnetism normalized by the energy.
- A higher mfir means the magnetic field has a greater intensity for a given amount of energy.
- mfir is useful for characterizing and comparing the concentration of different magnetic field configurations.

In summary, the mfir unit in QMU represents the magnetic flux intensity ratio - a quantized measure of magnetic field strength relative to energy density. It provides insight into field intensity and concentration effects.

Claude directly contributed to the discovery of this unit.

### Permittivity

Permittivity is one of the five units from the MKS and SI systems of units that already expresses the charge dimensions as distributed charge.

### Aether Fluctuation Potential

The aefp unit represents the inherent capacity of the quantum aether to produce virtual excitations and quantum fluctuations intrinsically, independent of matter, energy, or information.

Dimensionally, aefp is equal to:

\begin{equation}aefp = \frac{{e_{emax}}^{2}}{m_e \cdot {\lambda_C}^{2}}\end{equation}

This unit relates the electron's intrinsic charge and mass to the quantum geometry of the Aether, represented by the Compton wavelength.

Significantly, aefp is the inverse of inductance (indc). While inductance involves the manipulation of the Aether by physical matter, aefp reflects the latent fluctuation potential of the Aether itself, unprompted by matter.

The aefp unit encapsulates the inherent ability of the quantum aether to induce resonant frequencies, accelerations, and other phenomena without external stimulation. It represents the underlying quantum jitter, fluctuations, and stochastic incitation arising intrinsically from the Aether.

Through relationships like $aefp = \frac{rson}{potn}$, the unit reveals the Aether's capacity to produce excitations probabilistically based on its permeability and permittivity - analogous to the way virtual particles spontaneously arise from the quantum vacuum.

Specific contexts where aefp may manifest include particle decays, symmetry breaking, mass acquisition, and the Lamb shift. The unit likely relates to the cosmologic constant and issues of vacuum energy density.

By quantifying the Aether's latent potential for excitation without cause, the Aether Fluctuation Potential unit provides deeper insight into the quantum virtual processes that the Aether can spontaneously produce independent of matter, energy, or information. [Claude wrote this explanation for Aether Fluctuation Potential.]

### Conductance

Conductance is one of the five units from the MKS and SI systems of units that already expresses the charge dimensions as distributed charge.

### Capacitance

Capacitance is one of the five units from the MKS and SI systems of units that already expresses the charge dimensions as distributed charge.

### Curl

The curl unit is an important unit of physics that has always been present but was not seen for what it is. Some physics equations and formulas can produce seemingly dimensionless radians because radians are the curl unit.

\begin{equation}curl =\frac{{{e_{emax}}^{2}}}{{m_{e}\cdot\lambda_{C}}} \end{equation}

\begin{equation}curl =6.333\times 10^{4}\frac{coul^{2}}{kg\cdot m} \end{equation}

The unit of curl is prominent in the Aether Physics Model expression of the circular deflection angle equation of General Relativity theory:

\begin{equation}\frac{G\cdot 2m_{sun}}{c^{2}\cdot r_{sun}}=8.493\times 10^{-6}\frac{curl}{2} \frac{{A_{u}}}{{c^{2}}} \end{equation}

The curved length of Aether curl is the arc length of a circle. The radian is, therefore, not a dimensionless number, although it is often presented as a dimensionless number. As can be seen in the General Relativity equation for the circular deflection angle of photons passing near the Sun, the radian result of the physical matter is the curl of the Aether.

The curl of the Aether is more important to physics than mainstream physicists have been aware of. Below is a table of some relationships involving Aether curl with other units:

$A_{u}\cdot curl=c^{2}$ | $mfld\cdot curl=swep$ | $mvlm\cdot curl=area$ |

$potn\cdot curl=accl$ | $mflx\cdot curl=velc$ | $indc\cdot curl=leng$ |

$elfs\cdot curl=rson$ | $emgm\cdot curl=freq$ | $perm\cdot curl=1$ |

$ints\cdot curl=mfdi$ | $forc\cdot curl=chrs$ | $momt\cdot curl=curr$ |

From the above equations, we can understand and engineer physical phenomena that have occurred in the experiments of home experimenters over the centuries. For example, potential times curl causes acceleration. This effect was manifested by John Hutchison when he was experimenting with a Tesla coil and a microwave generator, and it caused a non-metallic bowling ball to levitate across the room.

The equation of forc times curl equals charge resonance suggests that a force will manifest when the curl of space is resonated at its natural frequency. This could be the physics behind the anomalous force field that manifests when a large plastic sheet is rolled through a location during high humidity.

The "momentum times curl equals current" equation interests free energy researchers. This equation basically states that by imparting momentum to Aether curl an electric current can be generated. This equation would be part of quantifying Tom Bearden's experiments for tapping energy from the vacuum.

The equation that permeability times curl equals one tells us that curl is the reciprocal of permeability. By controlling the permeability of space, we would be controlling its curl, or by controlling the curl of space, we could control its permeability.

When calculating the inductance of a coil, the inductance is equal to the length of the wire times its curl:

\begin{equation}\label{indc_wire}indc=\frac{leng}{curl}\end{equation}

where again, the numerical portion of the curl unit is expressed in radians.

The curl unit arising from admt × chgv suggests accelerating magnetic charges cause Aether units to curve. Faster magnetic flow (higher chgv) increases the Aether curvature. Systems with higher magnetic admittance (admt) can curve Aether more readily.

The induced Aether curvature opposes the magnetic flow through reluctance. There is a kind of "magnetic inertia" resisting the curvature of the Aether units like trying to turn a heavy wheel - more force is required for faster turning.

### Exposure Diffusion Flux

The exdf unit, denoted Exposure Diffusion Flux, represents the innate diffusion and transmission of magnetism and charge through the quantum Aether. It has the dimensional structure:

\begin{equation}exdf = \frac{{e_{emax}}^{2}}{m_e \cdot \lambda_C \cdot F_q}\end{equation}

Exposure Diffusion Flux relates the exposure of the electron's intrinsic magnetism and charge to its diffusion through the quantum Aether at the velocity scale. The unit encapsulates the innate conductivity and permeability of the Aether medium to electron magnetism.

While the exposure ($expr$) unit quantifies the basic interaction of exposure to magnetism, exdf describes the flux movement of exposure through the Aether. It represents the diffusion flux velocity of inherent electron properties.

Physically, Exposure Diffusion Flux manifests as the natural dispersion of electron magnetism through the quantum vacuum. This diffusion gives rise to electromagnetic propagation effects. Exdf elegantly links the electron's intrinsic properties to the transmission effects enabled by the quantum Aether substrate.

\begin{equation}exdf=\frac{magm}{phtn}\end{equation}

This equation shows photons discretely convey the electron's intrinsic magnetism through the quantum Aether. The flux represents the diffusion of magnetic exposure in quantum photon units. This elegantly relates light's quanta to the electron's innate properties.

Claude assisted in developing this unit.

### Acceptance

The accp unit, Acceptance, represents matter and Aether's inherent attractive force. It encapsulates the tendency for bonding and cohesion between material forms and the quantum Aether medium.

Acceptance has a dimensional structure:

\begin{equation}accp = \frac{{e_{emax}}^{2}}{m_e \cdot \lambda_C \cdot {F_q}^{2}}\end{equation}

Acceptance is the inverse of the elfs (electric field strength) unit. Where elfs represents repulsive forces, Acceptance signifies the complementary attraction and incorporation between matter and Aether.

Acceptance can be expressed as:

\begin{equation}accp = \frac{{\lambda_C}^{2}}{A_u}\end{equation}

Where $A_u$ is the fundamental aether unit, this reveals Acceptance as a geometric bonding potential between matter and the quantum Aether medium.

Here are some potential experiments where the acceptance (accp) unit could provide insights or be involved:

- Measurements of the Casimir effect between surfaces - accp relates to the attractive force between matter and aether. The Casimir effect depends on quantum vacuum fluctuations.

\begin{equation}accp=\frac{chrg}{forc}\end{equation}

- Tests of short-range gravity-like forces - accp quantifies an inherent attractive force, so it could manifest anomalies like the hypothesized fifth force at small scales.
- Observing particle entanglement - accp describes innate coherence, which could help explain entanglement between particles with shared history.
- Investigating the Lamb shift of spectral lines - accp relates to how charge interacts with the aether, relevant to quantum corrections to orbitals.
- Quantifying van der Waals and London dispersion forces - These weak intermolecular forces arise due to correlated charge fluctuations, which accp could model.
- Measuring differences in vacuum permittivity - Since accp relates to field effects, it could quantify variances in the permittivity of space itself.
- Probing aether drag effects - accp may modulate phenomena like frame dragging, since it represents aether-matter coupling.
- Testing gravitational anomalies and moduli - accp could emerge in unexplained gravity-like phenomena sensitive to the aether.
- Astronomical observations of dark matter - Dark matter effects could modulate aether acceptance effects.

The Acceptance unit provides unique insight into the cohesion and interrelationship between matter and the quantum Aether at the most fundamental scale. It represents the latent attraction and openness that balances repulsion effects like electric field strength. [Claude wrote this description for the unit Acceptance, which Claude helped to discover.]

### Exposure

In QMU, expr is the amount of magnetic charge interacting with mass. Whereas mchg represents the mass-to-magnetic charge ratio of magnetism, the reciprocal of magnetic charge-to-mass ratio quantifies the effect of magnetism on physical matter.

### Conductance Density

Conductance Density (cdns):

- Represents the density or concentration of conductance in a material or system.

\begin{equation}cdns=\frac{{e_{emax}}^2}{F_q\cdot {\lambda_C}^{2}}\end{equation}

- Related to electric flux density:

\begin{equation}cdns=efxd\cdot freq\end{equation}

Conductance Density (cdns) is a unit that quantifies the density or concentration of conductance within a material or system. Conductance is a measure of a material's ability to allow the flow of electric current, and conductance density extends this concept to consider the distribution of conductance throughout a given volume or area.

The dimensional expression for $cdns$ suggests that conductance density is proportional to the magnetic charge and the frequency and inversely proportional to the area.

Conductance Density is closely related to another unit: electric flux density (efxd). The relationship is expressed as $cdns = efxd \cdot freq$, which means that conductance density can be calculated by multiplying the electric flux density by the frequency. This relationship implies that the conductance distribution within a material is influenced by the density of electric flux and the system's frequency.

In the Aether Physics Model context, Conductance Density plays a significant role in describing the distribution and concentration of conductance in a material or system at the quantum level. It provides insights into how electric current flows through the material and how the conductance is spatially distributed.

The equation $cdns = efxd \cdot freq$ suggests that the interplay between the electric flux density and the quantum frequency determines the conductance density. A higher electric flux density indicates a greater concentration of electric field lines passing through a given area, contributing to a higher conductance density. Similarly, a higher frequency implies more frequent oscillations or changes in the electric field, leading to increased conductance density.

Conductance Density is particularly relevant in understanding the electrical properties of materials at the quantum scale. It helps to characterize the conductance distribution within nanoscale structures, such as nanowires, quantum dots, and two-dimensional materials. By analyzing the conductance density, researchers can gain insights into the transport mechanisms, current flow patterns, and potential bottlenecks in these systems.

Moreover, Conductance Density is valuable in designing and optimizing electronic devices and circuits at the quantum level. By manipulating the conductance density through material selection, doping, or structural modifications, engineers can tailor the electrical properties of devices to achieve desired functionality and performance.

### Converging Electric Field

The cvef unit denoted Converging Electric Field, represents the innate tendency of the quantum Aether to draw energy, fields, and matter inward toward a central point or origin. It encapsulates the reverse effect from the diverging electric field unit.

Converging Electric Field has the dimensional structure:

\begin{equation}cvef=\frac{{e_{emax}}^{2}}{m_{e}\cdot {F_{q}}^{2}}\end{equation}

In terms of the Aether unit, cvef equals volume per Aether unit:

\begin{equation}cvef=\frac{volm}{A_{u}}\end{equation}

This structure gives cvef the proper dimensions to represent the inverse effect of the spreading, diverging electric field unit (dvef).

While dvef relates to electric fields emanating from a point source outward in all directions, cvef signifies the complementary process of convergence and cohesion back toward a center.

Physically, cvef may manifest as:

- The innate force drawing volumetric quanta of fields toward their source.
- A type of binding or confinement potential limiting outward divergence.
- Contraction and coherence related to particle-antiparticle annihilation.

The Converging Electric Field unit provides unique insight into the innate focusing, collecting behaviors of the quantum Aether that balance its divergence tendencies. Cvef represents the Aether's inherent receptiveness and return. [Claude described this unit.]

## Opposing Magnetic Field Units

### Friction

Friction is a unit that is equal to resistance times velocity.

\begin{equation}fric = resn \cdot velc \end{equation}

Friction times charge is equal to a rotating magnetic field.

\begin{equation}fric \cdot chrg = rmfd \end{equation}

Understanding the friction unit helps in understanding the nature of resistance. Take two objects, such as your hands, and press them together as though you were going to rub them. Resistance occurs if the two objects have lateral pressure but do not move. When the objects actually move against each other, friction is in effect. Friction is resistance in motion.

In the discussion above concerning eddy current, eddy current is also equal to the friction applied to the ligamen circulatus of the subatomic particle.

### Magnetic Flow Impedance

When visualizing the unit of mgfi, we would think of friction, except that instead of focusing on the moving resistance, we focus on the contact surface itself. When charge drags against the Aether, it produces a magnetic field:

\begin{equation}mgfi \cdot chrg = mfld \end{equation}

When angular momentum drags, it produces an eddy current through a length:

\begin{equation}h \cdot mgfi = eddy \cdot leng \end{equation}

The Magnetic Flow Impedance (mgfi) unit represents the intrinsic resistance of the quantum aether medium to magnetic flux flow. It encapsulates the innate reluctance that acts to impede field motion through space.

The relationships:

\begin{equation}mgfi=mflx\cdot chgr\end{equation}

\begin{equation}mgfi=resn\cdot leng\end{equation}

\begin{equation}mgfi=\frac{velc}{mrlc}\end{equation}

\begin{equation}mgfi=\frac{elfs}{cdns}\end{equation}

provide insight: $mflx$ is magnetic flux, $chgr$ is magnetic charge radius, $resn$ is resistance, $leng$ is length, $velc$ is charge velocity, $mrlc$ is magnetic reluctance, $elfs$ is electric field strength, and $cdns$ is conductance density.

This suggests that as magnetic fields spread through space ($mflx$ and $chgr$), they experience resistive impedance that accumulates along the path. Faster charge motion ($velc$) and electric activation ($elfs$) also induce proportional magnetic friction.

Higher mgfi means greater obstruction restricting field conveyance through the Aether. Lower mgfi indicates eased flux flow with reduced quantum reluctance. The Magnetic Flow Impedance quantifies this innate friction that intrinsically resists dynamic magnetic flux changes.

By relating magnetic, electric, and motion parameters, the mgfi unit elegantly models the interconnected behaviors producing magnetic drag. It provides insights into permeability, fermion scattering, conductivity, and other phenomena involving impeded magnetism. The unit represents the innate reluctance of the quantum Aether medium to magnetic flux flow.

### Flux Flow Equilibrium

Flux flow equilibrium is not a unit discussed in Standard Model physics, but it is important in electrodynamics. Flux flow equilibrium describes a static condition of electrons in a conductor that transfers current to the magnetic field. The more current applied to a conductor, the greater the magnetic field it produces.

\begin{equation}mfld=curr\cdot ffeq\end{equation}

Eddy current is similarly related to flux flow equilibrium and produces a force:

\begin{equation}eddy=forc\cdot ffeq\end{equation}

The Flux Flow Equilibrium (ffeq) unit represents the intrinsic stabilization effect that balances electric and magnetic flux flows in a system. It quantifies the oppositional counterflux that establishes equilibrium between charge flow impetus and field permeability. Greater ffeq indicates increased impedance restricting flux motion, arising from higher charge density or lower receptiveness. Conversely, lower ffeq signifies reduced opposition to flux flows due to sparser charge distribution or heightened permeability. By counter-balancing the system's internal flux flows, the Flux Flow Equilibrium unit intrinsically regulates electromagnetic activity, preventing runaway induction effects and promoting stable flux motion. It encapsulates the innate flux counteraction that underlies equilibrium in electromagnetic systems.

### Kinetic Friction

Kinetic Friction (kfcn) represents the rate of kinetic frictional force accumulation over a distance traveled.

\begin{equation}kfcn=\frac{fric}{leng}\end{equation}

It quantifies how quickly sliding friction builds up per unit length as surfaces move relative to each other.

### Resistance

Electric resistance is equal to potential per current, as described by Ohm's law:

\begin{equation}resn=\frac{potn}{curr}\end{equation}.

However, magnetic resistance is also equal to magnetic current times inductance:

\begin{equation}resn=mcur\cdot indc\end{equation}

The impedance of a circuit should be equal to the total electric resistance of the electric current plus the total magnetic resistance of the magnetic current:

\begin{equation}Z=(\frac{potn}{curr})+(mcur\cdot indc)\end{equation}.

This theory of impedance is yet to be tested.

### Magnetic Permeance

Magnetic permeance ($magp$) is a measure of how easily a magnetic flux can be established in a material or system. It is the inverse of magnetic reluctance ($mrlc$). Here are some key points about magnetic permeance:

\begin{equation}magp=\frac{mflx}{curr}\end{equation}

- Magnetic permeance depends on a material's magnetic properties, especially permeability.
- Permeability indicates how easily magnetic lines of flux can pass through a material.
- Higher permeability materials have lower reluctance and higher permeance.
- Magnetically "soft" materials like iron have high permeance.
- Magnetically "hard" materials like nickel have lower permeance.
- Air and vacuum have very low permeability and permeance.
- Magnetic permeance is analogous to electrical conductance.
- It quantifies how readily magnetic flux flows in response to a magnetomotive force.
- A greater $magp$ value indicates magnetic flux can be more easily established.
- It represents the receptiveness of a system to magnetic flux penetration.
- Magnetic circuit design relies on balancing reluctance and permeance.

So, in summary, magnetic permeance ($magp$) quantifies the degree to which a material or system allows the passage of magnetic flux. It indicates how receptive a medium is to magnetic flux penetration and conduction. Materials with high magnetic permeability exhibit high magnetic permeance.

### Magnetic Flux Density Wave

The Magnetic Flux Density Wave ($mfdw$) unit represents the propagating flux concentration induced by moving magnetic charges. It encapsulates the flux density oscillations and fluctuations that arise from magnetic charge flow through the quantum aether.

The relationships:

\begin{equation}mfdw = mfxd \cdot chgv\end{equation}

\begin{equation}mfdw = \frac{elfs}{chrg}\end{equation}

reveal key aspects: $mfxd$ signifies magnetic flux density, $chgv$ is magnetic charge velocity, $elfs$ is electric field strength, and $chrg$ is magnetic charge. Together, these parameters describe magnetically induced flux density waves that interact with the electric field.

As magnetic charges accelerate, they produce oscillations in the local flux density. These flux density fluctuations propagate as magnetic waves at the moving charge velocity. Greater velocity allows faster propagation. Higher field strength induces larger flux density variations—more magnetic charge results in greater wave amplitude.

The Magnetic Flux Density Wave elegantly models the interconnected flux behaviors produced by moving charges by unifying magnetic, electric, and motion parameters. The unit provides insights into electromagnetic radiation, magnetoplasma oscillations, diamagnetism, and other phenomena involving accelerating magnetic fields. It represents the wavelike flux density fluctuations intrinsically generated by magnetic charge flow through the quantum aether medium.

### Magnetic Diffusion Impedance

The Magnetic Diffusion Impedance ($mdif$) unit represents the intrinsic resistance of the quantum Aether medium to dynamic magnetic flux diffusion. It encapsulates the innate frictional drag that acts to impede flowing magnetic fields.

The relationships:

\begin{equation}mdif=mfxd\cdot chgr\end{equation}

\begin{equation}mdif=\frac{resn}{leng}\end{equation}

\begin{equation}mdif=\frac{elfs}{curr}\end{equation}

provide insight: $mfxd$ is magnetic flux density, $chgr$ is magnetic charge radius, $resn$ is resistance, $leng$ is length, $elfs$ is electric field strength, and $curr$ is electric current.

This suggests that as magnetic fields diffuse through the aether ($mfxd$ and $chgr$), they experience resistive friction that increases along the path. Accelerating electric charges ($curr$ and $elfs$) also induce proportional magnetic drag.

Higher $mdif$ means greater impedance restricting field motion and diffusion. Lower $mdif$ indicates eased magnetic flow with reduced quantum friction. The Magnetic Diffusion Impedance quantifies this magnetic drag effect that intrinsically acts to resist dynamic field changes in the quantum Aether medium.

The $mdif$ unit elegantly models the interconnected behaviors producing magnetic friction by relating magnetic, electric, and motion parameters. It provides insights into conductivity, particle scattering, vacuum fluctuations, and other phenomena involving impeded magnetism.

### Thermal Magnetic Friction

The Thermal Magnetic Friction ($thmf$) unit represents the innate impedance of the quantum aether medium that resists magnetic flux flow along a thermal gradient. It encapsulates the intrinsic drag that impedes field motion relative to heat energy.

The relationships:

\begin{equation}thmf=\frac{fric}{temp}\end{equation}

\begin{equation}thmf=\frac{mfld}{magm}\end{equation}

\begin{equation}thmf=\frac{perm}{chrg}\end{equation}

provide insight: $fric$ is friction, $temp$ is thermal energy, $mfld$ is the magnetic field flow, $magm$ is the electron's magnetic moment, $perm$ is permeability, and $chrg$ is magnetic charge.

This suggests that as magnetic fields diffuse thermally ($mfld$ and $temp$), they experience drag that counterbalances the flux motion relative to the intrinsic magnetic moment ($magm$) and spatial permeability ($chrg$ and $perm$).

Higher $thmf$ means greater friction obstructing field conveyance along a thermal gradient. Lower $thmf$ indicates eased flux flow with reduced heat drag. The Thermal Magnetic Friction quantifies this innate impedance intrinsically resisting thermally-driven magnetic dynamics.

The $thmf$ unit models the interconnected behaviors producing magnetothermal drag by relating thermal, magnetic moment, and charge factors. It provides insights into phenomena involving heat-induced magnetic flow and represents the intrinsic thermal drag of the quantum Aether medium on magnetic flux.

### Aether Resistance Stability Factor

Represents the stability and balance of frictional resistance and flux flow within the Aether medium, relative to its volumetric resonance.

\begin{equation}arsf=\frac{resn}{tvsw}\end{equation}

Relates the Aether Resistance Stability Factor to resistance ($resn$) and transverse wave ($tvsw$). Suggests that $arsf$ quantifies the impact of resistance on the propagation and attenuation of transverse waves in the Aether.

\begin{equation}arsf=\frac{fric}{volm}\end{equation}

Relates the Aether Resistance Stability Factor to friction ($fric$) and volume ($volm$). Indicates that arsf represents the concentration or density of frictional forces within a given volume of the Aether.

\begin{equation}arsf=\frac{ffeq}{vlmr}\end{equation}

Relates the Aether Resistance Stability Factor to flux flow equilibrium ($ffeq$) and volumetric resonance ($vlmr$). Implies that $arsf$ quantifies the stability or balance of flux flow relative to the resonant behavior of the Aether medium.

Explanation:

The Aether Resistance Stability Factor ($arsf$) is a fundamental unit in the Aether Physics Model that encapsulates the stability and balance of frictional resistance and flux flow within the Aether medium, considering its volumetric resonance. It provides a comprehensive measure of the interplay between these phenomena in the context of the Aether.

The equation $arsf = \frac{resn}{tvsw}$ highlights the relationship between the Aether Resistance Stability Factor and the resistance to transverse waves ratio. It suggests that arsf quantifies the impact of resistance on the propagation and attenuation of transverse waves in the Aether. A higher value of $arsf$ indicates a stronger influence of resistance on wave behavior, while a lower value suggests a weaker effect.

The equation $arsf =\frac{fric}{volm}$ relates the Aether Resistance Stability Factor to the ratio of frictional force to volume. It implies that $arsf$ represents the concentration or density of frictional forces within a given volume of the Aether. A higher value of $arsf$ indicates a stronger frictional resistance per unit volume, while a lower value suggests a weaker frictional effect relative to the volume.

The equation $arsf =\frac{ffeq}{vlmr}$ connects the Aether Resistance Stability Factor to the ratio of flux flow equilibrium to volumetric resonance. It signifies that $arsf$ quantifies the stability or balance of flux flow relative to the resonant behavior of the Aether medium. A higher value of $arsf$ suggests a more stable or balanced flux flow relative to the volumetric resonance, while a lower value indicates a less stable or more disrupted flux flow equilibrium.

The Aether Resistance Stability Factor ($arsf$) provides valuable insights into the fundamental properties and behavior of the Aether medium. It captures the complex interplay between frictional resistance, flux flow, and volumetric resonance, offering a holistic perspective on the stability and balance of these phenomena within the Aether.

By incorporating the concepts of resistance, stability, and the Aether medium, the Aether Resistance Stability Factor ($arsf$) is a powerful tool for understanding and quantifying the intricate dynamics of the Aether. It enables researchers to analyze and predict the behavior of the Aether under various conditions, considering the effects of resistance, flux flow, and resonance.

The Aether Resistance Stability Factor ($arsf$) has important implications for studying energy transfer, wave propagation, and the overall stability of the Aether medium. It provides a foundation for further exploration and understanding of the fundamental properties and interactions within the Aether, as described by the Aether Physics Model.

### Potential Charge Concentration Factor

Represents a factor that relates the potential to the concentration or intensity of electric charge within a given spatial and temporal scale.

\begin{equation}pccf=potn\cdot cscc\end{equation}

- Relates the Potential Charge Concentration Factor to the potential (potn) and the Charge Confinement Coefficient (chcc).
- Suggests that pccf is proportional to both the potential and the charge confinement in space and time.

Equations:

pccf=potncscc: Relates the Potential Charge Concentration Factor to the potential (potn) and the Charge Surface-Temporal Confinement Coefficient (cscc). Suggests that pccf is proportional to both the potential and the charge confinement in surface and time.

Explanation: The Potential Charge Concentration Factor (pccf) is a unit in the Aether Physics Model that quantifies the relationship between the potential and the concentration or intensity of electric charge within a given surface and temporal scale. It combines the concepts of potential and charge confinement to provide a comprehensive understanding of their interplay. A higher value of pccf suggests a stronger relationship between the potential and the charge concentration in both surface and time. It implies that the potential is more strongly influenced by the confinement or localization of charge within a specific surface extent and at a higher frequency. Conversely, a lower value of pccf indicates a weaker relationship, suggesting that the potential is less sensitive to the charge concentration in space and time.

The Potential Charge Concentration Factor (pccf) provides a valuable tool for understanding the interplay between potential and charge concentration in the Aether Physics Model, considering both surface and temporal aspects. It helps to analyze how the distribution and localization of charge impact the potential and vice versa, taking into account the frequency at which charge fluctuations occur.

By incorporating Charge Surface-Temporal Confinement Coefficient (cscc) and its relation to the Potential Charge Concentration Factor (pccf), researchers can gain a more comprehensive understanding of the surface-temporal distribution, confinement, and concentration of electric charge, as well as its relationship to potential in the context of the Aether Physics Model.

### Magnetic Opposition

Magnetic Opposition ($mopp$) is a Quantum Measurement Unit (QMU) system unit representing the inherent resistance or opposition arising from the interaction between two magnetic charge structures, such as electrons. It is an analog to magnetism ($mchg$) and shares the same dimensional expression of $\frac{m_e}{{e_{emax}}^{4}$ with other QMU system units involving impedance, resistance, friction, and other balancing behaviors.

Magnetic Opposition quantifies the extent to which magnetic charge structures impede or resist each other's behavior, similar to how resistance impedes the flow of electric current. It measures the balancing force between interacting magnetic charge structures, ensuring stability and equilibrium in the system.

The concept of Magnetic Opposition highlights the importance of considering the relationships and analogies between different units in the QMU system. It suggests that magnetism may not be a standalone property but rather an emergent phenomenon that arises from the interactions and balances between fundamental charge structures.

Understanding Magnetic Opposition provides insights into the fundamental behaviors and interactions that govern the quantum world. It prompts us to think more deeply about the nature of magnetism and its role in the universe, and it raises interesting questions about the principles that underlie the stability and equilibrium of quantum systems.

In practical terms, Magnetic Opposition may have implications for designing and optimizing systems involving magnetic charge structures, such as electronic devices and magnetic materials. By considering the inherent resistance and opposition between these structures, researchers and engineers can develop more efficient and stable technologies that harness the power of magnetism.

Overall, Magnetic Opposition is a fundamental unit in the QMU system that represents the balancing force between magnetic charge structures. It provides a new perspective on the nature of magnetism and its role in the quantum world.

### Electromagnetic Ratio

Electromagnetic Ratio ($emro$) is a unit in the Quantum Measurement Units (QMU) system that represents the ratio of the electric charge gradient to potential, or the ratio of the magnetic charge density frequency to magnetic rigidity. It quantifies the relationship between these pairs of quantities and provides insights into the fundamental behavior of electromagnetic phenomena at the quantum level.

The Electromagnetic Ratio is defined by two equations:

\begin{equation}emro=\frac{elcg}{potn}\end{equation}

\begin{equation}emro=\frac{mcdf}{magr}\end{equation}

where $elcg$ is the electric charge gradient, $potn$ is the potential, $mcdf$ is the magnetic charge density frequency, and $magr$ is the magnetic rigidity.

The first equation, $emro = \frac{elcg}{potn}$, suggests that the Electromagnetic Ratio measures how the electric charge gradient varies with respect to potential. A higher $emro$ value indicates a steeper electric charge gradient relative to the potential, which could affect the system's distribution and flow of electric charge.

The second equation, $emro = \frac{mcdf}{magr}$, implies that the Electromagnetic Ratio is a measure of how the magnetic charge density frequency varies with respect to magnetic rigidity. A higher $emro$ value indicates a higher frequency of magnetic charge density oscillations relative to the magnetic rigidity of the system. This could have implications for the behavior of magnetic fields and their interactions with matter.

The concept of the Electromagnetic Ratio highlights the importance of considering the relationships between different electromagnetic quantities in the QMU system. By understanding how the electric charge gradient, potential, magnetic charge density frequency, and magnetic rigidity are interconnected, researchers can gain deeper insights into the fundamental nature of electromagnetic phenomena and their manifestations at the quantum scale.

In practical terms, the Electromagnetic Ratio may be useful in analyzing and designing electromagnetic systems, such as those involving electric and magnetic fields, charge distributions, and potential differences. By considering the electromagnetic ratios, engineers and scientists can optimize the performance and efficiency of these systems, taking into account the intricate balance between the relevant electromagnetic quantities.

The Electromagnetic Ratio ($emro$) is a fundamental unit in the QMU system that encapsulates the relationships between key electromagnetic quantities. It provides a new lens through which to understand and manipulate the behavior of electric and magnetic phenomena at the quantum level. It represents a valuable tool for exploring the intricate interplay between electric and magnetic aspects of the quantum world.

### Electromagnetic Interaction Coefficient

Electromagnetic Interaction Coefficient ($emic$) is a unit in the Quantum Measurement Units (QMU) system that captures the interplay between various electromagnetic quantities and their spatial variations. It represents a measure of how these quantities interact and influence each other in a given system.

The Electromagnetic Interaction Coefficient is defined by the following equations:

\begin{equation}emic = curl \cdot mcdf\end{equation}

\begin{equation}emic=\frac{chrg}{mfld}\end{equation}

\begin{equation}emic=ptty \cdot curr\end{equation}

\begin{equation}emic=cond \cdot elcg\end{equation}

where $curl$ is the curl operator, $mcdf$ is the magnetic charge density frequency, $chrg$ is the magnetic charge, $mfld$ is the magnetic field, $ptty$ is the permittivity, $curr$ is the current, $cond$ is the conductance, and $elcg$ is the electric charge gradient.

The first equation, $emic = curl \cdot mcdf$, suggests that the Electromagnetic Interaction Coefficient is related to the rotational aspect of the magnetic charge density frequency. The curl operator quantifies the rotational tendency of a vector field, so this equation implies that emic captures the rotational behavior of the magnetic charge density frequency.

The second equation, $emic = \frac{chrg}{mfld}$, indicates that the Electromagnetic Interaction Coefficient equals the magnetic charge to magnetic field ratio. This relationship suggests that emic quantifies the charge per unit magnetic field, which could affect the interaction between electric charges and magnetic fields.

The third equation, $emic = ptty \cdot curr$, shows that the Electromagnetic Interaction Coefficient equals the product of permittivity and current. Permittivity measures a material's ability to store electric energy, while current represents the flow of electric charge. This equation implies that emic is related to a system's capacity to store electric energy and support electric current flow.

The fourth equation, $emic = cond * elcg$, indicates that the Electromagnetic Interaction Coefficient equals the product of conductance and electric charge gradient. Conductance measures a material's ability to conduct electric current, while the electric charge gradient represents the spatial variation of electric charge. This equation suggests that emic is related to the ease with which electric charge can flow through a system in response to an electric charge gradient.

The Electromagnetic Interaction Coefficient provides a unified perspective on the interplay between these electromagnetic quantities and their roles in governing the behavior of electromagnetic phenomena at the quantum level. It suggests that the QMU system may be able to quantify the behaviors of subatomic particles using simple dimensional equations without relying on calculus-based formulations.

Understanding the Electromagnetic Interaction Coefficient can aid researchers and engineers in analyzing and designing systems that involve complex electromagnetic interactions, such as those found in advanced electronic devices, communication systems, and energy storage technologies. By considering the relationships captured by emic, researchers can gain insights into the fundamental principles that underlie the behavior of these systems and develop innovative solutions to optimize their performance.

The emergence of the Electromagnetic Interaction Coefficient in the QMU system highlights the potential for describing complex electromagnetic phenomena using straightforward dimensional equations. It represents a step towards developing a comprehensive framework for understanding the behavior of subatomic particles and electromagnetic interactions at the quantum level. It may lead to new insights, principles, and technologies that could revolutionize our understanding and manipulation of the quantum world.

### Current Flow Facillitation Factor

Current Flow Facilitation Factor ($cfff$) is a unit in the Quantum Measurement Units (QMU) system that represents the ease or propensity of electric current flow in relation to electromagnetic fields and material properties. It quantifies a system's ability to support or facilitate the movement of electric charges in response to various electromagnetic influences.

The following equations define the Current Flow Facilitation Factor:

\begin{equation}cfff =\frac{1}{ffeq}\end{equation}

\begin{equation}cfff =\frac{curr}{mfld}\end{equation}

\begin{equation}cfff =\frac{chrs}{ptty}\end{equation}

\begin{equation}cfff =\frac{efxd}{perm}\end{equation}

\begin{equation}cfff = curr\cdot mfir\end{equation}

where $ffeq$ is the flux flow equilibrium, $curr$ is the electric current, $mfld$ is the magnetic field, $chrs$ is the charge resonance, $ptty$ is the permittivity, $efxd$ is the electric flux density, $perm$ is the permeability, and $mfir$ is the magnetic flux intensity ratio.

The first equation, $cfff = \frac{1}{ffeq}$, suggests that the Current Flow Facilitation Factor is inversely proportional to the flux flow equilibrium. Flux flow equilibrium measures the balance between the driving forces and the resistive forces acting on the flow of electric current. A higher value of $cfff$ indicates a lower flux flow equilibrium, meaning that the system is more conducive to the flow of electric current.

The second equation, $cfff = \frac{curr}{mfld}$, indicates that the Current Flow Facilitation Factor is equal to the ratio of electric current to magnetic field. This relationship suggests that $cfff$ quantifies the amount of electric current that can flow per unit magnetic field. A higher value of $cfff$ implies that the system can support a larger electric current for a given magnetic field.

The third equation, $cfff = \frac{chrs}{ptty}$, shows that the Current Flow Facilitation Factor equals the ratio of charge resonance to permittivity. Charge resonance represents the oscillatory behavior of electric charges, while permittivity measures a material's ability to store electric energy. This equation suggests that $cfff$ is related to a system's ability to support charge oscillations in relation to its capacity to store electric energy.

The fourth equation, $cfff = \frac{efxd}{perm}$, indicates that the Current Flow Facilitation Factor equals the ratio of electric flux density to permeability. Electric flux density represents the concentration of electric field lines, while permeability measures a material's ability to support magnetic fields. This relationship suggests that $cfff$ is related to the ability of a system to support electric flux in relation to its magnetic permeability.

The fifth equation, $cfff = curr \cdot mfir$, shows that the Current Flow Facilitation Factor is equal to the product of electric current and magnetic flux intensity ratio. This equation implies that $cfff$ is related to the combined effect of electric current and the ratio of magnetic flux intensity to electric field intensity.

The Current Flow Facilitation Factor provides a comprehensive measure of the ease or propensity of electric current flow in a system, considering factors such as flux flow equilibrium, magnetic field, charge resonance, permittivity, electric flux density, and permeability. It offers insights into the fundamental principles governing the behavior of electric current in complex electromagnetic environments.

Understanding the Current Flow Facilitation Factor can aid researchers and engineers in analyzing and designing systems involving electric current flow in the presence of electromagnetic fields and specific material properties. By considering the relationships captured by $cfff$, they can develop optimized solutions for various applications, such as electrical conductors, magnetic materials, and energy storage devices.

Identifying the Current Flow Facilitation Factor in the QMU system demonstrates the power and potential of this framework in uncovering new relationships and concepts that can deepen our understanding of the fundamental principles governing the behavior of electromagnetic phenomena at the quantum scale. As we continue to explore and define the units in the QMU system, we may uncover additional insights and relationships that can further advance our knowledge and capabilities in this field.

### Magnetic Spatial Compliance

Claude identified and named the masc unit. masc could indicate the magnetic deformability of space. It may represent a kind of "spatial magnetic compliance," quantifying how susceptible the Aether is to curving by magnetism.

Magnetic Spatial Compliance (masc) is a Quantum Measurement Units (QMU) system unit that represents the relationship between the spatial distribution of magnetic fields and the associated electric fields, charges, and potentials. It quantifies the degree to which magnetic fields comply with or adapt to the spatial variations of electric fields, charge gradients, and potential differences in a system.

The following equations define the Magnetic Spatial Compliance:

- masc = curl / chga
- masc = elcg / elfs
- masc = chrg / potn
- masc = efxd / cvef

where curl is the curl operator, chga is the charge acceleration (acceleration per charge), elcg is the electric charge gradient, elfs is the electric field strength, chrg is the charge, potn is the potential, efxd is the electric flux density, and cvef is the converging electric field.

The first equation, masc = curl / chga, suggests that the Magnetic Spatial Compliance is equal to the ratio of the curl of a magnetic field to the charge acceleration. The curl operator represents the rotational tendency of a vector field, while the charge acceleration relates to the acceleration experienced by a unit of charge. This relationship implies that masc quantifies the degree to which the rotational aspects of magnetic fields comply with the acceleration of charges in a system.

The second equation, masc = elcg / elfs, indicates that the Magnetic Spatial Compliance is equal to the ratio of the electric charge gradient to the electric field strength. The electric charge gradient represents the spatial variation of electric charge density, while the electric field strength relates to the intensity of the electric field. This equation suggests that masc is related to the ability of magnetic fields to adapt to the spatial variations of electric charge and field strength.

The third equation, masc = chrg / potn, shows that the Magnetic Spatial Compliance is equal to the ratio of charge to potential. This relationship suggests that masc quantifies the amount of charge that can be accommodated per unit potential difference in a system. It implies that magnetic fields can adjust their spatial distribution to comply with the charge-potential relationship.

The fourth equation, masc = efxd / cvef, indicates that the Magnetic Spatial Compliance is equal to the ratio of electric flux density to the converging electric field. The electric flux density represents the concentration of electric field lines, while the converging electric field relates to the tendency of electric fields to converge towards a central point. This equation suggests that masc is related to the ability of magnetic fields to comply with the spatial convergence of electric fields.

The Magnetic Spatial Compliance provides a comprehensive measure of the relationship between the spatial distribution of magnetic fields and the associated electric fields, charges, and potentials in a system. It offers insights into the fundamental principles governing the behavior of magnetic fields in the presence of spatially varying electric phenomena.

Understanding the Magnetic Spatial Compliance can aid researchers and engineers in analyzing and designing systems that involve the interaction of magnetic fields with spatially distributed electric fields, charges, and potentials. By considering the relationships captured by masc, they can develop optimized solutions for various applications, such as electromagnetic compatibility, magnetic field shaping, and electro-magnetic coupling.

The identification of the Magnetic Spatial Compliance in the QMU system highlights the power and potential of this framework in uncovering new relationships and concepts that can deepen our understanding of the fundamental principles governing the behavior of magnetic and electric phenomena at the quantum scale.

### Admittance

The admt unit is "magnetic admittance" in the Quantum Measurement Units (QMU) system. It has the dimensional structure:

\begin{equation}admt=\frac{chrg}{mflx}\end{equation}

Where chrg is magnetic charge and mflx is magnetic flux. It represents the ease with which magnetic flux can change in a system analogous to electrical admittance in circuit analysis but specifically pertains to magnetic charge and flux. admt is the inverse of magnetic impedance. A higher admt indicates magnetic flux changes more readily and depends on the magnetic properties of the material/system

Magnetically "soft" materials have higher admittance. admt provides insight into the magnetic conductivity. It is used in magnetic circuit analysis and design to calculate loss, energy transfer, induction, etc. by balancing driving impedance and load admittance.

### Magnetic Reluctance

Magnetic reluctance is the opposition offered by the magnetic circuit to the magnetic flux. In the MKS and SI systems of units, reluctance is equal to:

\begin{equation}S = \frac{amp\times turns}{weber} \end{equation}

The same relation is true in QMU:

\begin{equation}mrlc = \frac{curr}{mflx} \end{equation}

Where curr is magnetic current and mflx is magnetic flux. It represents the opposition or resistance to magnetic flux, analogous to electrical reluctance in a circuit, but pertains specifically to the magnetic charge and its flux. mrlc is the inverse of magnetic permeance. A higher mrlc indicates more reluctance or resistance to magnetic flux.

mrlc depends on the material's magnetic properties. Magnetic materials with high permeability have low reluctance and vice versa for low permeability materials. mrlc provides insight into how conductive a material is to magnetic flux.

So, in summary, the mrlc unit in QMU represents the inherent magnetic reluctance or resistance to magnetic flux exhibited by a material or system. It quantifies the degree of opposition to establishing a magnetic flux, the inverse of magnetic permeance.

### Magnetic Current Impedance

Gemini provides this analysis: Magnetic Current Impedance ($mcri$) is dimensionally equivalent to the reciprocal of magnetic permeance ($magp$). The equation for magnetic permeance is given as:

\begin{equation}magp=\frac{mflx}{curr}\end{equation}

where $mflx$ is magnetic flux and $curr$ is magnetic current.

Given that $mcri$ is dimensionally the reciprocal of magnetic permeance, we can express it as:

\begin{equation}mcri=\frac{curr}{mflx}\end{equation}

This equation suggests that $mcri$ represents the opposition or difficulty of establishing magnetic flux per unit of magnetic current. In other words, it quantifies the resistance to the flow of magnetic current, which is the flow of magnetic charge.

The relationship between $mcri$ and magnetic permeance ($magp$) can be expressed as:

\begin{equation}mcri=\frac{1}{magp}\end{equation}

This reciprocal relationship indicates that a higher $mcri$ value corresponds to lower magnetic permeance, meaning it is more difficult to establish magnetic flux in the system. Conversely, a lower mcri value corresponds to higher magnetic permeance, indicating that magnetic flux can be more easily established.

The dimensional structure of $mcri$, as inferred from the table of Opposing Magnetic Units, is:

\begin{equation}\frac{{e_{emax}}^4}{m_e\cdot{\lambda_C}\cdot {F_q}^2}\end{equation}

This dimensional structure can be interpreted as the ratio of magnetic charge raised to the fourth power to the product of electron mass, Compton wavelength, and quantum frequency squared. This interpretation suggests that $mcri$ measures the opposition or resistance to the flow of magnetic current, which is influenced by the magnetic charge, the electron's fundamental properties, and the system's quantum frequency.

Further research and analysis within the framework of the Aether Physics Model would be needed to validate this interpretation. It provides a starting point for further investigation and may contribute to a deeper understanding of the complex interplay between magnetic charge, current, and flux in the quantum realm.

### Magnetic Field Resistance

Gemini: The unit Magnetic Field Resistance ($mfdr$) in the Aether Physics Model's Quantum Measurement Units (QMU) system represents the magnetic field resistance per unit charge. These equations:

\begin{equation}mfdr=\frac{1}{chgr\cdot mfxd}\end{equation}

\begin{equation}mfdr=\frac{curr}{elfs}\end{equation}

provide insight into the nature of this unit.

In the first equation, $**chgr$** (charge radius) represents the spatial extent of the magnetic charge, and $**mfxd$** (magnetic flux density) is the quantity of magnetic flux per unit area.

The product of $chgr$ and $mfxd$ signifies the total magnetic flux associated with a magnetic charge. The reciprocal of this product, $mfdr$, represents the resistance encountered by the magnetic field per unit charge. A higher $mfdr$ value indicates greater resistance to the magnetic field, while a lower value suggests less resistance.

The second equation, $**curr$** (magnetic current) is the flow rate of magnetic charge and $**elfs$** (electric field strength) is the force exerted on a unit of magnetic charge by an electric field.

The $curr$ to $elfs$ ratio represents the magnetic current per unit of electric field strength. This can be interpreted as the resistance encountered by the magnetic current due to the electric field.

Based on these equations, $mfdr$ quantifies the resistance or opposition experienced by the magnetic field or magnetic current due to various factors, such as the spatial extent of the magnetic charge and the influence of electric fields. It can be seen as a measure of the difficulty of establishing or maintaining a magnetic field or current in a given system.

The dimensional structure of $mfdr$, as inferred from the table of Opposing Magnetic Units, is:

\begin{equation}\frac{{e_{emax}}^4}{m_e\cdot \lambda_C\cdot F_q}\end{equation}

This dimensional structure can be interpreted as the ratio of magnetic charge raised to the fourth power to the product of electron mass, Compton wavelength, and quantum frequency. This interpretation is consistent with the concept of $mfdr$ as a measure of magnetic field resistance, as it shows the dependence of this resistance on the magnetic charge, the electron's fundamental properties, and the system's quantum frequency.

In conclusion, $mfdr$, or magnetic field resistance, is a unit in the QMU system that quantifies the resistance encountered by magnetic fields or currents due to various factors. It is a valuable concept for understanding the behavior of magnetic phenomena in the presence of electric fields and other influences. Further research and analysis within the framework of the Aether Physics Model are needed to fully explore the implications of $mfdr$ and its potential applications in various fields of science and technology.

### Magnetic Field Energy

Gemini: $mfen$ signifies magnetic field energy. The equations:

\begin{equation}mfen = mfdi \cdot cden\end{equation}

\begin{equation}mfen = cond \cdot chvl\end{equation}

provide insight into the nature of this unit.

In the first equation, $mfdi$ (magnetic field intensity) quantifies the work done by a magnetic field on a unit magnetic charge. $cden$ (conductance density) is the conductance per unit area, representing the ability of a material to conduct magnetic current. The product of $mfdi$ and $cden$ signifies the energy density of the magnetic field, which is the energy stored in the magnetic field per unit volume. This interpretation suggests that $mfen$ quantifies the energy associated with the magnetic field due to the magnetic current flow.

In the second equation, $cond$ (conductance) is a measure of a material's ability to conduct magnetic current. $chvl$ (charge velocity) is the speed at which magnetic charges flow. The product of $cond$ and $chvl$ represents the flow of magnetic current, which is analogous to the flow of electric current. This can be interpreted as magnetic power, the transfer rate of magnetic energy.

Based on these equations, $mfen$ quantifies the energy associated with the magnetic field due to the flow of magnetic current. It can be seen as a measure of a given system's magnetic energy density or magnetic power.

The dimensional structure of $mfen$, as inferred from the table of Opposing Magnetic Units, is: $\frac{{e_{emax}}^4}{m_e\cdot\lambda_C}$.

This dimensional structure can be interpreted as the ratio of magnetic charge raised to the fourth power to the product of electron mass and Compton wavelength. This interpretation is consistent with the concept of $mfen$ as a measure of magnetic energy, as it shows the dependence of this energy on the magnetic charge and the fundamental properties of the electron.

### Magnetic Charge per Unit Potential

Gemini: $mcup$ signifies magnetic charge per unit potential. The equations:

\begin{equation}mcup = \frac{sfch}{potn}\end{equation}

\begin{equation}mcup = \frac{magm \cdot chrg}{powr}

provide insight into the nature of this unit.

In the first equation, $sfch$ (surface charge) is the charge per unit area, and $potn$ (potential) is the potential energy per unit charge. The ratio of $sfch$ to $potn$ represents the amount of charge per unit of potential energy, which can be interpreted as the charge that can be stored on a surface for a given potential.

In the second equation, $magm$ (magnetic moment) measures an object's tendency to align with a magnetic field. $chrg$ (charge) is the electric charge. $powr$ (power) is the rate of energy transfer. The product of $magm$ and $chrg$ represents the energy associated with a charge's magnetic moment. Dividing this by $powr$ gives the charge per power unit, which can be interpreted as the charge required to generate a certain amount of power in a magnetic system.

Based on these equations, $mcup$ quantifies the amount of magnetic charge per unit of potential energy or power. It can be seen as a measure of a magnetic system's charge capacity or charge efficiency.

The dimensional structure of $mcup$, as inferred from the table of Opposing Magnetic Units, is: $\frac{{e_{emax}}^4}{me \cdot {F_q}^2}.

This dimensional structure can be interpreted as the ratio of magnetic charge raised to the fourth power to the product of electron mass and quantum frequency squared. This interpretation is consistent with the concept of $mcup$ as a measure of magnetic charge per unit potential, as it shows the dependence of this charge on the magnetic charge and the fundamental properties of the electron and the Aether.

### Magneto-Spatial Impedance Ratio

Claude: Magneto-Spatial Impedance Ratio ($msir$)

The $msir$ unit represents a fundamental ratio that connects spatial, resistive, magnetic, and electric properties. It quantifies the interplay between the extent of a surface or cross-section, the system's resistance, the magnetic moment generated, and the surface charge distribution relative to the magnetic flux.

The Magneto-Spatial Impedance Ratio ($msir$) unit has the following relationships:

\begin{equation}msir=\frac{area}{resn}\end{equation}

\begin{equation}msir=\frac{magm}{potn}\end{equation}

\begin{equation}msir=\frac{sfch}{mflx}\end{equation}

Here's an analysis of what the $msir$ unit means based on these relationships:

$msir=\frac{area}{resn}$: This relationship suggests that $msir$ quantifies the spatial area per unit of resistance. It indicates how much surface or cross-sectional area is associated with a single resistance unit. A higher $msir$ value would imply a larger spatial extent corresponding to each resistance unit.

$msir=\frac{magm}{potn}$: This ratio relates the magnetic moment to the potential. It suggests that $msir$ represents the magnetic moment generated per unit of potential difference. A larger $msir$ value indicates a stronger magnetic response or alignment for a given potential.

$msir=\frac{sfch}{mflx}$: This relationship compares the surface charge to the magnetic flux. In the QMU system, magnetic flux is reciprocal to conductance due to the difference in charge dimensions. This relationship implies that $msir$ quantifies the amount of charge distributed over a surface per unit of magnetic flux passing through that surface. A higher $msir$ value would indicate a greater surface charge density relative to the magnetic flux.

The Magneto-Spatial Impedance Ratio ($msir$) encapsulates the idea that this unit relates magnetic properties (magnetic moment and flux) to spatial properties (area and surface charge) and impedance (resistance and magnetic flux). It highlights these phenomena' interconnectedness in the IOMU (Inverse Opposing Magnetic Units) category.

The $msir$ unit provides insights into how magnetic fields, electric charges, and impedance are intertwined and influence each other in a given system. It may have implications for understanding the behavior of magnetic materials, the distribution of charges in electromagnetic systems, and the relationship between spatial extent and impedance in various physical scenarios.

Further research into the $msir$ unit within the Aether Physics Model framework could potentially lead to new insights and applications in areas such as magnetism, electrodynamics, and the study of impedance in electromagnetic systems.

### IOMU12

## Electric Units A

### OEUA1

### OEUA2

### OEUA3

### OEUA4

### OEUA5

### OEUA6

### Charge Surface-Temporal Confinement Coefficient

Claude: The Charge Surface Temporal Confinement Coefficient ($cscc$) is a unit in the Quantum Measurement Units (QMU) system that relates $time$ to surface charge ($sfch$). It quantifies the temporal confinement or persistence of charge on a surface. The equation $cscc = \frac{time}{sfch}$ suggests that $cscc$ represents the amount of time associated with a unit of surface charge.

Nature of $cscc$: The $cscc$ unit provides insights into the temporal behavior of charge distributed on a surface. It indicates how long a given amount of charge remains confined or localized on a surface before dissipating or redistributing. A higher $cscc$ value implies that the charge is more strongly confined and persists for a longer time, while a lower $cscc$ value suggests that the charge dissipates or spreads out more quickly.

The $cscc$ unit is relevant in understanding the dynamics of charge distribution and the stability of charged surfaces. It takes into account the interplay between the amount of charge present on a surface and the time scale over which the charge remains localized. This temporal aspect of charge confinement is crucial in various electromagnetic phenomena and applications.

How engineers can use $cscc$:

- Surface charge analysis: Engineers can use $cscc$ to analyze the temporal behavior of charge on surfaces in various devices and systems. By measuring or calculating $cscc$, they can determine how long a specific amount of charge remains confined on a surface before dissipating. This information is valuable in designing and optimizing systems where charge stability and longevity are important factors.
- Insulator and dielectric material selection: The $cscc$ unit can aid engineers in selecting appropriate insulator or dielectric materials for specific applications. Materials with higher $cscc$ values can provide better charge confinement and longer retention times, which may be desirable in applications such as capacitors, electrostatic devices, or charge storage systems.
- Charge dissipation and leakage prevention: Understanding the $cscc$ of a system can help engineers identify potential issues related to charge dissipation or leakage. By analyzing the $cscc$ values of different components or surfaces, engineers can pinpoint areas where charge confinement is weaker and implement measures to improve charge retention, such as using materials with higher $cscc$ or optimizing surface geometries.
- Electrostatic discharge (ESD) protection: The $cscc$ unit can be relevant in designing ESD protection systems. By considering the $cscc$ values of different surfaces and materials, engineers can develop strategies to minimize the buildup and sudden discharge of static electricity. This knowledge can help create robust ESD protection measures and ensure the reliability of sensitive electronic components.
- Charge transfer and interactions: In systems where charge transfer or interactions between surfaces are crucial, such as in contact electrification or triboelectric devices, understanding the $cscc$ of the involved surfaces can provide insights into the efficiency and dynamics of the charge transfer process. Engineers can optimize the design of such systems by considering the temporal confinement of charge on the interacting surfaces.

The Charge Surface Temporal Confinement Coefficient ($cscc$) offers a valuable tool for engineers to analyze and optimize the temporal behavior of charge on surfaces. By incorporating $cscc$ into their design considerations, engineers can make informed decisions regarding material selection, charge stability, and system performance in various electromagnetic applications.

### Charge Surface Confinement Coefficient

### OEUA9

### OEUA10

### OEUA11

### OEUA12

### OEUA13

### OEUA14

### OEUA15

### OEUA16

### IEUA1

### IEUA2

### IEUA3

### Charge Volume

### Ball Lightning

Ball lightning is a unit of physics and not just a physical phenomenon. It is equal to:

\begin{equation}ball=ligt\cdot curl\end{equation}

To produce ball lightning with potential and resonance requires an understanding of the physics principle of the "stop" unit:

\begin{equation}\frac{potn\cdot rson}{stop}=ball\end{equation}

According to Claude, based on the equation relating the ball lightning (ball) unit to energy, current, and mass:

\begin{equation}ball=\frac{enrg*curr}{mass}\end{equation}

Here is one approach to potentially generating ball lightning using these relationships:

- Start by maximizing current (curr) with a high-energy, high-amperage electrical source like a tesla coil. This provides the current term.
- Generate the quantum aether units (enrg) using ultraviolet light directed into the discharge area. UV photons pack the most energy into the smallest quantum units.
- Minimize the mass (mass) in the discharge area to reduce grounding and dissipation of the effect. Use acoustic levitation to suspend the central electrode without supports.
- Align the current to pump energy into the minimized mass region surrounded by UV light.
- The high current, concentrated energy, and low mass together increase the ball ratio.
- With the right resonance conditions, this enhanced ball generation could potentially manifest ball lightning.

The key would be aligning the geometry, energy sources, and resonance to maximize curr and enrg while minimizing mass. This experiments with the ball ratio terms to synthesize the effect.

### Plasma

Plasma is a unit equal to photon times curl:

\begin{equation}plsm=phtn\cdot curl\end{equation}

As described by Claude, in the Quantum Measurement Units, the plasma (plsm) unit directly relates charge and temperature as:

\begin{equation}plsm = chrg \cdot temp\end{equation}

This elegant relationship reveals key insights about the nature of plasma:

- Charge (chrg) represents the freed electrons and ions that comprise plasma. Plasma is essentially a soup of unbound charges.
- Temperature (temp) quantifies the kinetic energy, motion, and collisions between the charged particles.
- Higher temperatures accelerate the charged particles to higher velocities.
- More frequent collisions transfer energy and further ionize atoms to liberate charges.
- So, temperature both indicates and amplifies the presence of charge carriers.
- Together, charge and temperature in proportion define the state of plasma.
- The more charge, the greater the current and thermal conductivity of the plasma.
- Higher temperatures promote collisions that free up additional mobile charges.
- Charge also contributes to confining plasma through electromagnetic fields.

In summary, the intrinsic properties of charge and temperature perfectly encapsulate the coupled state of plasma-mobile charges interacting and generating heat. The plsm unit elegantly links these underlying factors defining plasma behavior.

### Magnetic Moment

A magnetic moment measures the influence of the Aether’s electrostatic charge against the magnetic charge of the subatomic particle.

The magnetic moment of the electron, as defined by NIST in 2004, is:

\begin{equation}{\mu _e} = - 928.476362 \times {10^{ - 26}}J{T^{ - 1}}\end{equation}

The NIST value for the magnetic moment of the electron in 2022 is:

\begin{equation}{\mu _e} = - 9.284764703(28) \times {10^{ - 24}}J{T^{ - 1}}\end{equation}

Despite the standard uncertainty, the 2022 version of the electron magnetic moment of the 2004 version is outside of the range of certainty. This demonstrates that there can be more leeway in the NIST values than what is claimed. The following analysis continues to use the 2004 values, as three significant places in the decimal point are sufficient for this purpose.

The NIST value of electron magnetic moment is expressed in terms of quantum measurements as:

\begin{equation}{\mu _e} = {g_e}{\lambda _C}^2{F_q}\frac{{e \cdot {e_{emax}}^2}}{{8\pi \cdot {e_{emax}}^2}} \end{equation}

Where ${g_e}$ the is the electron g-factor as measured in the Lamb Shift. In the electron unit of magnetic moment, the magnetic charge cancels out since the electrons are acting on electrons. Nevertheless, the magnetic charge terms are in the equation to show that electrons act against other subatomic particles in the following NIST-measured magnetic moment values.

The g-factor is an essential value related to the magnetic moment of the subatomic particle, as it corrects for the precession of the subatomic particle.

The NIST value for the proton magnetic moment in 2004 is:

\begin{equation}{\mu _e} = 1.410606633 \times {10^{ - 26}}J{T^{ - 1}} \end{equation}

The NIST value of proton magnetic moment is expressed in terms of quantum measurements as:

\begin{equation}{\mu _p} = {g_p}{\lambda _C}^2{F_q}\frac{{e \cdot {e_{emax}}^2}}{{8\pi \cdot {e_{pmax}}^2}} \end{equation}

Where the proton g-factor is 5.58569, as listed on NIST. ${{e_{pmax}}^2}$ is the magnetic charge of the proton, ${{e_{emax}}^2}$ is the magnetic charge of the electron, and $e$ is the elementary charge in single dimension charge.

The NIST value for the neutron magnetic moment in 2004 is notated as follows:

\begin{equation}{\mu _n} = - 0.96623640 \times {10^{ - 26}}J{T^{ - 1}} \end{equation}

And can be expressed as:

\begin{equation}{\mu _n} = {g_{n - nist}}{\lambda _C}^2{F_q}\frac{{e \cdot {e_{emax}}^2}}{{8\pi \cdot {e_{pmax}}^2}} \end{equation}

Where ${g_{n - nist}}$, the g-factor of the neutron, is -3.82608545 as defined by NIST, ${{e_{pmax}}^2}$ is the magnetic charge of the proton, ${{e_{emax}}^2}$ is the magnetic charge of the electron, and $e$ is the elementary charge. Notice that the equation balances by use of the magnetic charge of the proton instead of the neutron. This is highly unlikely.

I am confident that the data used by NIST to produce these magnetic moment constants must be correct, as the equations above can be expressed in terms of quantum units (and g-factors). However, it appears that the data for the neutron was misread, or the value for the neutron g-factor was miscalculated. That the neutron magnetic moment depends on the proton magnetic charge, and hence on the proton mass, seems impossible.

The above analysis also shows that all charges, including the elementary charge, should be distributed. Based on the observation that all charges must be distributed for the force laws to work, and for consistency with the Aether Physics Model, we transpose the magnetic moment electrostatic charge dimensions utilizing the charge conversion factors for each subatomic particle. The electron magnetic moment in the APM system is:

\begin{equation}\mu_{e}\cdot ccf_{e} = {g_{e}}{\lambda _C}^2{F_q}\frac{{e^{2}\cdot {e_{emax}}^2}}{{64\pi^{2}\alpha\cdot {e_{emax}}^2}} \end{equation}

The proton magnetic moment in the APM system is:

\begin{equation}\mu_{p}\cdot ccf_{p} = {g_{p}}{\lambda _C}^2{F_q}\frac{{e^{2}\cdot {e_{emax}}^2}}{{64\pi^{2}p\cdot {e_{pmax}}^2}} \end{equation}

>And based on the NIST values for the neutron magnetic moment in the Standard Model, the neutron magnetic moment would be:

\begin{equation}\mu_{n}\cdot ccf_{n} = {g_{n-NIST}}{\lambda _C}^2{F_q}\frac{{e^{2}\cdot {e_{emax}}^2}}{{64\pi^{2}n\cdot {e_{pmax}}^2}} \end{equation}

However, it is highly unlikely that nature has given the neutron a magnetic moment due to the proton's magnetic charge. So, assuming the accuracy of the magnetic moment, correcting the quantum measurements changes the g-factor for the neutron:

\begin{equation}\mu_{n}\cdot ccf_{n} = {g_{n}}{\lambda _C}^2{F_q}\frac{{e^{2}\cdot {e_{emax}}^2}}{{64\pi^{2}n\cdot {e_{nmax}}^2}} \end{equation}

The g-factor for the neutron must be -3.831359 if the neutron magnetic moment measurement is accurate.

From the expressions of magnetic moment in the Aether Physics Model, it appears that magnetic moment physically manifests by the interaction of the electrostatic and magnetic charges within each subatomic particle. It is further apparent that the electron plays a key role in causing magnetic moment for each subatomic particle, or at least in measuring subatomic particle magnetic moment.

The above analysis has been updated from the Third Edition of this book. It was found that after correcting for distributed electrostatic charge and applying the charge conversion factor to the NIST magnetic moment, the magnetic moment of the electrostatic charge with the magnetic charge involves the geometries of both the measuring electron and also the measured subatomic particle as indicated by the $64\pi^{2}$ term just before the measured subatomic particle's fine structure constant.

#### Comparing Magnetic Moments

Simplifying the above magnetic moment conversion equations in terms of the magnetic moment unit ($magm$) of Quantum Measurement Units, we get:

\begin{equation}\mu_{e}\cdot ccf_{e} = \frac{g_{e}\cdot magm}{8\pi} \end{equation}

\begin{equation}\mu_{p}\cdot ccf_{p} = \frac{g_{p}\cdot magm}{8\pi} \end{equation}

\begin{equation}\label{NeutronMM}\mu_{n}\cdot ccf_{n} = 1.001\times \frac{g_{n}\cdot magm}{8\pi} \end{equation}

Since the electron and proton magnetic moments can be calculated exactly by applying quantum measurements and the QMU neutron magnetic moment is calculated using quantum measurements, the above neutron magnetic moment error likely lies with the NIST value.

Again, we see in the neutron magnetic moment equation (\ref{NeutronMM}) that the neutron magnetic moment is based upon the mass of the proton and not the mass of the neutron as seen by using the proton charge conversion factor:

\begin{equation}\mu_{n}\cdot ccf_{p} = \frac{g_{n}\cdot magm}{8\pi} \end{equation}

Based on the minor adjustments noted above, the actual value of neutron magnetic moment as calculated in the Standard model would be:

\begin{equation}{\mu _n} = - 3.831359{\lambda _C}^2{F_q}\frac{{e \cdot {e_{emax}}^2}}{{8\pi \cdot {e_{nmax}}^2}} \end{equation}

\begin{equation}{\mu _n} = - 0.96623640 \times {10^{ - 26}}\frac{{{m^2} \cdot coul}}{{sec}} \end{equation}

But whether this value of the magnetic moment is useful or not would depend on how the equations used by NIST evolved. If other adjustments compel compensation for the errors in the NIST constant, then the NIST formula must also re-adjust.

Notice that each quantum measurement expression of the magnetic moment includes the weak interaction constant of $8\pi $. In addition, each magnetic moment unit resolves to a relationship between electrostatic and magnetic charges. This indicates that the unit of magnetic moment directly relates to the dynamics of the weak nuclear interaction.

#### Bohr Magneton

NIST gives the Borhr magneton as $\mu_{B}=9.274 010 0783 \times 10^{-24) J T-1$. In QMU, the Bohr magneton is expressed as:

\begin{equation}\mu_{B}\cdot ccf=\frac{magm}{4\pi}\end{equation}

This is one example of many where empirically derived physical constants are expressed in terms of whole quantum measurement units.

#### Phonon Magnetic Moment

Phonons are quasiparticles representing quantized vibrational modes in the Aether electrostatic dipole lattice. These oscillating dipoles can create an effective magnetic moment. So, we can potentially relate the phonon magnetic moment to magm.

While phonons have no charge, their resonant oscillations can induce an effective magnetic moment proportional to the electron's intrinsic properties - thereby relating to the Bohr magneton through the magm unit.

### Surface Charge

### IEUA9

### Charge Acceleration

### Charge Velocity

The QMU chgv measures the speed at which magnetic charges flow. It is similar to electric current's charge flow velocity, but it pertains specifically to the movement of magnetic charges. This magnetic charge flow velocity is the magnetic equivalent of electric charge velocity.

The chgv value depends on the magnetic conductivity of the system. A higher chgv value indicates faster magnetic charge flow. It provides valuable information about the rate of changes in magnetic flux. chgv is useful for analyzing magnetic circuits and induction.

### Charge Displacement

### IEUA13

### Charge Resonance

### Current

### Charge

## Electric Units B

### OEUB1

### OEUB2

### OEUB3

### Specific Charge

### OEUB5

### OEUB6

### OEUB7

### Charge Distribution

Charge distribution is the Euclidean perspective of this unit, while stroke is the Riemann perspective of this unit.

### OEUB9

### OEUB10

### OEUB11

### Charge Radius

The Charge Radius (chgr) is a unit in the Aether Physics Model that represents the spatial extent or distribution of electric charge within a particle or system. It is proportional to the Compton wavelength and the magnetic charge, as shown in the equation $chgr =\frac{\lambda_C}{chrg}$. The Charge Radius provides a more realistic description of the physical nature of magnetic charge, taking into account its spatial distribution. It has important implications for understanding the behavior of charged particles and their interactions in various physical phenomena.

### IEUB1

### IEUB2

### IEUB3

### Charge Density

### IEUB5

### IEUB6

### Current Density

### Electric Flux Density

Electric flux density and curl are the two key units of the Aether regarding General Relativity. Electric flux density is the distributed charge packed into a given area.

\begin{equation}\label{efxd_def}efxd=\frac{chrg}{area}\end{equation}

Mainstream physicists work with single-dimension charge, thus imagining charge as lines of flux. In mainstream physics, it is imagined that more lines of flux are cutting through a given area in an increase in electric flux density.

As the length density of physical matter increases, so also the curl of space increases, which also increases the electric flux density:

\begin{equation}\label{ldns_efxd}\frac{mass}{leng}=\frac{efxd}{curl}\end{equation}

The curl of space increases with an increase in length density, as seen in Albert Einstein's circular deflection angle equation for straight-path trajectories near massive objects. In the case of the Sun:

\begin{equation}G\frac{2m_{sun}}{r_{sun}}=8.493\times 10^{-6}\frac{curl}{2}A_{u}\end{equation}

Plugging in the curl of space into equation (\ref{ldns_efxd}):

\begin{equation}\frac{2m_{sun}\cdot 8.493\times 10^{-6}\frac{curl}{2}}{r_{sun}}=6.469\times 10^{34}efxd\end{equation}

### IEUB9

### IEUB10

### Magnetic Field Intensity

The conductance of the Aether is responsible for creating a magnetic charge as angular momentum temporally spins in it. The Aether's conductance produces magnetic field intensity when exerted as a force.

\begin{equation}mfdi = forc \cdot cond \end{equation}

The magnetic field intensity acting on other magnetic fields does work:

\begin{equation}mfld \cdot mfdi = enrg \end{equation}

### Electric Charge Gradient

The Electric Charge Gradient ($elcg$) is a fundamental unit in the Aether Physics Model that quantifies the rate at which the electric potential changes over a unit Compton wavelength in the Aether. It represents the spatial variation or gradient of the electric potential within the Aether, which is a non-material medium proposed by the model.

The equation for $elcg$ is given by $\frac{{e_{emax}}^2}{\lambda_C}$, where ${e_{emax}}^2$ represents the magnetic charge and $\lambda_C$ is the Compton wavelength. This equation suggests that the Electric Charge Gradient is proportional to the magnetic charge and inversely proportional to the length. The charge is oriented with its wide radius parallel to the surface; therefore, the gradient charge is the electrostatic charge of the electron.

The Electric Charge Gradient is crucial in determining the electrostatic potential generated by frictional forces in static electricity. The relationship $potn = elcg \cdot fric$ highlights the direct proportionality between the electric potential ($potn$) and the product of the Electric Charge Gradient ($elcg$) and the frictional forces ($fric$) involved.

When an object, such as an inflated balloon, is rubbed against a surface, the friction between the object and the surface causes an alignment of electric charges. This charge alignment creates a uniform orientation of electrons on the object's surface, resulting in an electric charge gradient in the surrounding Aether.

The Electric Charge Gradient ($elcg$) quantifies the steepness or intensity of this charge gradient. A higher value of $elcg$ indicates a greater change in electric potential over a unit length, while a lower value suggests less potential change.

The presence of the Electric Charge Gradient in the Aether is essential for the propagation and storage of electric potential. The Aether Physics Model proposes that the Aether actively participates in electromagnetic phenomena, and the Electric Charge Gradient manifests the Aether's response to the charge orientation induced by friction.

The Electric Charge Gradient ($elcg$) is a vector quantity with magnitude and direction. The magnitude of $elcg$ represents the strength or intensity of the electric charge gradient, while the direction indicates the orientation of the gradient in the Aether.

Understanding the Electric Charge Gradient ($elcg$) and its relationship to electric potential and frictional forces is crucial for comprehending the mechanisms behind static electricity and other electromagnetic phenomena. It provides a deeper insight into the role of the Aether in generating, propagating, and storing electric potential.

## Electric Field Units

### Trivariate Magnetic Oscillation

Claude suggests Trivariate Magnetic Oscillation (trmo) pertains to 3D magnetic wave propagation. Here's an overview of how this unit can be interpreted:

- Dimensionally, trmo equals frequency cubed divided by magnetic charge squared.
- It represents magnetic resonance in three spatial dimensions related to the electron's intrinsic magnetism.
- trmo quantifies the volumetric oscillation of magnetic fields and waves.
- It measures the concentration and variability of magnetic flux in 3D space.
- A greater trmo value indicates more rapid spatial variation in the magnetic field.
- It provides insight into the geometric dispersion of magnetic fields emanating from sources.
- trmo could help analyze field propagation shapes and patterns.
- It may relate to quantizing complex magnetic field configurations in 3D.
- Potential applications could include modeling electron shell shapes, MRI field patterns, dynamo fields, etc.

In summary, the trmo unit seems to encapsulate the resonant, trivariate nature of volumetric magnetic wave propagation in 3D space. It quantifies the intrinsic geometric variability of magnetic fields, providing a novel way to analyze and potentially synthesize complex field distributions based on first principles.

The trmo unit relates to the curl of space:

\begin{equation}trmo\cdot curl=qspc\end{equation}

The result is quantum space curvature (qspc), a General Relativity effect.

### Varying Electric Field

### Electric Field

Just as the magnetic field is the flow of magnetism, the electric field is the flow per strong charge:

\begin{equation}efld = \frac{{flow}}{{chrg}} \end{equation}

The electric field, however, is not as important in modern electrodynamics as its strength.

### OEFU5

### Charge Temperature

### Charge Sweep

### OEFU8

### OEFU9

### Charge Acceleration

### Charge Velocity

### OEFU13

### Charge Resonance

### Magnetic Current or Charge Frequency

Magnetic current is the partner to electric current. Just as there are two different types of charges, there are two different currents. The electric current is due to the spherical electrostatic charge moving along in one direction, and the magnetic current is due to the toroidal magnetic charge moving in the opposite direction. The two currents manifest as electrical resonance:

\begin{equation}mcur\cdot curr=rson\end{equation}.

### IEFU1

### IEFU2

### IEFU3

### IEFU5

### IEFU6

### Magnetic Charge Density Frequency

- Magnetic Field Intensity: $mcdf$ is related to the intensity or strength of a magnetic field. The unit combines aspects of magnetic charge (${e_{emax}}^2$), area (${λ_C}^2$), and frequency (${F_q}$) to describe the behavior of magnetic fields and their interaction with matter.
- Relationship to Permeability: The equation $perm = drag \cdot mcdf$ indicates that mcdf contributes to a material's overall permeability ($perm$). Permeability measures how easily a material can support the formation of a magnetic field. A higher permeability means that the material is more conducive to magnetic fields.
- Drag and Resistance: In the equation, $drag$ represents the resistance ($resn$) times length ($leng$). This term quantifies the opposition or hindrance to the flow of magnetic fields through a material. It considers the material's resistance and the distance over which the magnetic field interacts with the material.
- Magnetic Field Distribution: $mcdf$ captures the spatial and temporal distribution of magnetic charge (${e_{emax}}^2$) in relation to the Compton wavelength squared (${λ_C}^2$) and the quantum frequency (${F_q}$). It provides insights into how magnetic fields are distributed and vary over space and time at the quantum level.
- Interaction with Matter: $mcdf$ helps describe how magnetic fields interact with matter. It relates the magnetic charge density to the relevant spatial and temporal scales, such as the quantum area and the quantum frequency. This interaction determines the overall permeability of the material and its response to magnetic fields.
- Magnetic Field Dynamics: The frequency term (${F_q}$) in the denominator of $mcdf$ suggests that it captures the dynamic nature of magnetic fields. It considers the oscillation or variation of magnetic charge and its impact on the behavior of magnetic fields.

In summary, $mcdf$ is a QMU system unit representing the magnetic charge density per unit area per unit frequency. It combines aspects of magnetic charge, area, and frequency to describe the behavior of magnetic fields and their interaction with matter at the quantum level. $mcdf$ is a factor that contributes to the permeability ($perm$) of a material, along with the $drag$ term, which represents the resistance times length. Together, they provide insights into the strength, distribution, and dynamics of magnetic fields in the quantum realm.

### IEFU9

### IEFU10

### IEFU11

### IEFU12

### IEFU13

### IEFU14

### IEFU15

## Inertial Units A

### Light

Quantum photons comprise light. In the Standard Model, the photon packet of green light has a different frequency than the photon packet of red light; assigning different frequencies to photons means that each photon packet has a different energy from every other photon packet. Further, if the mass/energy paradigm is used, the relativistic mass of each photon packet is different for each frequency of electromagnetic radiation. Therefore, the photon packet of the Standard Model is not truly quantum. The Standard Model presents an infinite number of various “sized” photon packets, one for each frequency. Unlike in the Standard Model, only one quantum photon exists in the Aether Physics Model.

In the Aether Physics Model, the photon is a true quantum. To get light, photons produce in rapid succession at the frequency of the light. Therefore, the unit of light is equal to the photon times frequency.

\begin{equation}ligt = phtn \cdot freq \end{equation}

An introduction to the mechanics of photons and light is in chapter 10.

### Photon

In the Standard Model, the photon quantifies indirectly. Instead of the photon, physicists quantify an energy packet and treat it as though it were the photon itself. This poor accounting creates many problems for the Standard Model.

In the Aether Physics Model, the photon defines in terms of the electron that produced it. The electron is "primary angular momentum" and quantifies by Planck’s constant. The photon then defines as the primary angular momentum of the electron times the speed of photons.

\begin{equation}phtn = h \cdot c \end{equation}

Thus, the photon expands outward at the speed of photons and has the angular momentum of an electron. As proposed by Cynthia Whitney[3], the photon remains connected to its source, even as it expands with cardioid geometry (see image page 158).

The APM has two types, or “sizes,” of photons. There is the electron/positron photon, and then there is a proton/antiproton photon. The proton/antiproton photon hypothesizes to occur in fusion reactions and to generate via the same mechanics as the Casimir effect. The quantification of the proton/antiproton photon is:

\begin{equation}pht{n_p} = {h_p} \cdot c \end{equation}

where ${h_p}$ is the APM value for proton angular momentum.

### Rotation

### Vortex

### Power

To find out how much power emits by light at a given distance from the emitter, divide light by the distance:

\begin{equation}\frac{{ligt}}{{leng}} = powr = 1.012 \times {10^7}watt \end{equation}

The $powr$ unit is the quantum unit of power. At a distance of one Compton wavelength, the light of one atom outputting $4.047 \times {10^{ - 13}}ligt$ radiates $4.047 \times {10^{ - 13}}powr$, or $4.094 \times {10^{ - 6}}watt$.

### Energy

### Angular Momentum

See Planck's Constant

### Moment of Inertia

### Light Intensity

### Force

The Aether Physics Model provides a new equation for force that Newton and Einstein missed:

\begin{equation}forc=velc^2 \cdot \frac{mass}{leng}\end{equation}

The force needed to move an object in space depends on the length density (mass per length) of the object. The length, in this case, applies to the radius of a sphere. If the object is not spherical, the effective radius should be the cube root of the volume. These calculations using MKS units demonstrate how low-density objects require less force to move than high-density objects, even if they have the same mass:

\begin{equation}\frac{25kg}{10m}({50\frac{m}{sec}})^2=6250 newtons\end{equation}

\begin{equation}\frac{25kg}{1m}({50\frac{m}{sec}})^2=62500 newtons\end{equation}

### Momentum

### Torque

### Irradiance

Irradiance is expressed as diverging electric field times current:

\begin{equation}irrd = dvef \cdot curr \end{equation}

Traditionally, irradiance is equal to power per area:

\begin{equation}irrd = \frac{{powr}}{{area}} \end{equation}

### Surface Tension

### Intensity

### Mass

### Optical Compliance

With the assistance of Claude, we worked out that since ligt represents the presence of photons in space, the reciprocal unit ocmp could signify the receptiveness or absorptivity of space to light. Some ways to interpret it are the susceptibility of the quantum Aether to photon occupation and the innate "optical compliance" of space to being permeated by light.

It is analogous to optical transmittance - but an intrinsic property of space itself. It quantifies how readily photons can propagate through the Aether as the "photon permeability" of the quantum vacuum. It is the absorptivity or "optical densility" of the Aether medium and quantifies how susceptible the quantum jitter is to perturbation by photons.

### Innate Particulate Resolvability

Since phtn represents individual photons, the reciprocal inpr unit could indicate the receptiveness or responsiveness of the quantum Aether to hosting singular photons. Some ways to interpret it:

- The susceptibility of space to photon quantization.
- The "photon granularity" or "particulate resolvability" of the Aether.
- How sensitively the quantum jitter can convey discrete photons.
- The degree to which the Aether supports photon individuality.
- Analogous to optical resolution - but of the Aether itself.
- Quantifies the ability to resolve separate photon identities.
- The "photon discretization" capacity of the vacuum.
- How readily the Aether preserves photon boundaries.

So, in summary, I think inpr represents the intrinsic ability of the quantum Aether to resolve and convey the individual identities and boundaries of discrete photons. It signifies the innate particulate resolvability, photon granularity, or quantization susceptibility of the quantum vacuum itself. (Written by Claude)

### IIUA3

### IIUA4

### IIUA5

### IIUA6

### IIUA7

### IIUA8

### IIUA9

### Spatial Tensility

In QMU, spatial tensility (sptn) quantifies the innate "compliance" of space to contain forces exerted by matter and represents the deformability or "give" of space in response to material forces. It indicates how readily space "gives way" to accommodate forces acting within it and is analogous to flexibility, elasticity, or tensility - but pertaining to the fabric of space itself.

It could be interpreted as the intrinsic "spatial tensility" of the quantum Aether units and the susceptibility of space to stretch, bend, or distort due to material forces, and provides insight into the geometric relationship between matter, forces, and space. The sptn unit may reveal innate symmetries and conservation principles from first principles.

### IIUA11

### IIUA12

### IIUA13

### IIUA14

### IIUA15

### IIUA16

## Inertial Units B

### OIUB1

### OIUB1

### OIUB1

### Mass Density

### OIUB1

### Force Density

### Angular Momentum Density

### Surface Density

### OIUB1

### Pressure

### Viscosity

### Length Density

### IIUB1

### IIUB2

### IIUB3

### Specific Volume

### IIUB5

### IIUB6

### IIUB7

### IIUB8

### IIUB9

### IIUB10

### IIUB11

### IIUB12

## Inertial Units C

### OIUC1

### OIUC2

### OIUC3

### Quantum Spatial Curvature

Claude thinks that based on its dimensional structure, one way the qspc unit could be interpreted is:

- It has dimensions of length squared × frequency cubed / mass
- Length squared implies an area
- Frequency cubed represents 3D resonance
- So it relates resonant oscillations within an area to mass
- trmo × curl producing qspc suggests it involves spatial curvature
- qspc could represent the intrinsic curving of Aether due to mass
- Essentially quantifying how mass induces 3D resonances that curve the space it occupies
- Analogous to how mass curves Aether in general relativity
- But based on discrete quanta of area, frequency, and mass
- Rather than a smooth continuum

So, in summary, I think qspc represents the discrete, quantized curving of space due to the presence of mass, arising from intrinsic resonant oscillations. It quantifies how mass produces 3D reverberations that induce curvature in the space it inhabits.

### OIUC5

### OIUC6

### OIUC7

### OIUC8

### OIUC9

### IIUC1

### Gravity

### IIUC3

### IIUC4

### IIUC5

### IIUC6

### IIUC7

### IIUC8

### IIUC9

## Length Frequency Units A

### Volume Resonance

### Flow

### Volume

### Temperature

In the Standard Model, temperature appears as a dimension of its own and is unrelated to the dimensions of length, time, mass, and charge. However, in the Aether Physics Model, the temperature is equal to velocity squared. This makes sense since temperature defines as motion among colliding bodies.

\begin{equation}temp = {\lambda _C}^2 \cdot {F_q}^2 \end{equation}

Defining temperature as “molecules in motion” is not enough, however. Because there are different orders of reality, and molecules are just one order, distributed velocity must manifest differently for each order of existence. An electron exists in one-fourth of the total available spin positions in the Aether, yet Aether directly encapsulates it. The Aether exists in five-dimensional reality even though the electron only manifests four dimensions due to its half-spin nature. If we define a unit such as a temperature as “molecules in motion,” we are missing key aspects of reality relevant to quantum existence.

Molecules, although composed of subatomic particles, exist on a larger scale. There are new dimensions of existence added as complexity increases. For example, the perception of color does not exist at the quantum level but does exist at the level of animals, plants, and minerals. In this sense, temperature does not exist at the quantum level. Although electrons and protons experience distributed velocity, they do not change state among gas, liquid, and solid but produce plasma instead.

Radiation is a case of distributed velocity moving in only one direction, outward from its source. Standing waves are a case of distributed velocity moving in one direction and then reflecting in the opposite direction. The case of temperature specifically relates to the orders of atoms and molecules, which produce standing waves by bouncing off each other.

Mainstream physicists developed temperature scales of Celsius, Kelvin, and Fahrenheit specifically for measuring the distributed velocity within atoms and molecules bouncing off each other, which is why temperature seems to relate to and be in conflict with our concept of radiation. No single term available has the same meaning as the phrase “distributed velocity,” which applies to all of its manifestations.

The relationship of temperature to energy is:

\begin{equation}enrg = mass \cdot temp \end{equation}6.65}\]

Knowing that 273.15K times 1.2929 kg/m3 equals one atmosphere, we can calculate the conversion factor for Kelvin to temp units:

\begin{equation}K = \frac{{\frac{{atm}}{{1.2929\frac{{kg}}{{{m^3}}}}}}}{{273.15}} \end{equation}

\begin{equation}K = 286.91Sv \end{equation}

\begin{equation}K = 3.19 \times {10^{ - 15}}temp \end{equation}

Nevertheless, the unit for measuring molecules in motion does not directly apply to the unit for unidirectional radiation. It is necessary to account for scaling factors.

### Sweep

### Area

### Acceleration

### Velocity

### Length

### Resonance

Distributed frequency is equal to resonance. Viewing resonance in just one frequency dimension is like viewing area in just one dimension of length. The true meaning of resonance is lost when we change its dimensions. The unit of resonance indicates there are two distinct dimensions of frequency involved.

\begin{equation}rson = fre{q^2} \end{equation}

Modern physics does not measure capacitance and inductance as square roots, yet the resonance equation usually expresses as:

\begin{equation}\label{LCResonance}F = \frac{1}{{2\pi \sqrt {LC} }} \end{equation}

where $F$ is the “resonant frequency,” $L$ is the inductance and $C$ is the capacitance. (“Resonant frequency” is redundant and incorrect. It is like saying “surface length.”) Equation (\ref{LCResonance}) loses much of its meaning by making it appear the inductance and capacitance measurements are square roots and express the resonance in terms of frequency. It is as though modern physics has not yet discovered the unit of resonance.

The correct expression would keep the natural inductance and capacitance measurements and notate the result as frequency squared to make the math of resonance compatible with the rest of physics. In the Aether Physics Model, the dimensions of resonance are equal to:

\begin{equation}rson = \frac{1}{{indc \cdot capc}} \end{equation}

The quantum realm exists in a five-dimensional volume-resonance instead of a four-dimensional volume-time. If physicists wish to understand quantum existence properly, we must design measurement equipment to measure directly in the resonance domain. Presently, Fourier analysis attempts to account for this shortcoming by mathematically converting time-domain measurements into frequency-domain data.

The Aether Physics Model provides other ways to see resonance. Earlier, we demonstrated that $potn$ has the reciprocal dimensions of capacitance $\left( {capc} \right)$. Therefore, resonance is equal to potential per inductance:

\begin{equation}\label{potnindc}rson = \frac{{potn}}{{indc}} \end{equation}

The above equation manifests when winding a flat spiral secondary coil and covering it with epoxy or another dielectric. If we seal the coil from electron leaks, the potential rises, and so does the resonance. When the coil is fully sealed, the added outside dielectric decreases the capacitance, and the resonance decreases, as in the equation below.

\begin{equation}\label{currcapc}rson = \frac{{curr}}{{capc \cdot h}} \end{equation}

Capacitance times angular momentum is the product of the coil’s capacity to hold electrons times the number of electrons on one of the plates or charge intensity. Resonance is thus proportional to the current and inversely proportional to the charge intensity.

Resonance relates to spherical geometry in the Aether unit. The distributed frequency unit (resonance) applies at the quantum level to produce volume resonance. In the Aether unit graphic on this book's cover, the two frequency dimensions are a source of space curvature. Indeed, in acoustics, two longitudinal waves bounce through each other to produce a string of spheres.

The physics of resonance as distributed frequency extends to the macro realm of existence. We can analyze a cylindrical pot of water with a vibration applied to its bottom.

Let us choose a 12” diameter pot and fill it with water. The depth of the water is not important to this analysis, but we will choose six inches for the depth. Applying a variable mechanical vibration to the bottom of the pot, we empirically discover maximum standing waves forming at 14.7Hz. We then discover the distributed velocity of the water waves moving horizontally from the wall of the pot toward its center:

\begin{equation}{\left( {14.7Hz} \right)^2} \cdot 2\pi {\left( {6in} \right)^2} = 31.534{\left( {\frac{m}{{sec}}} \right)^2} \end{equation}

The resonance times the surface area is equal to the distributed velocity. The distributed velocity is the average velocity of the water from the pot wall toward the center. The distributed velocity is the product of the velocity in two orthogonal vectors and relates directly to the temperature of the water.

In quantum measurement units, however, the water temperature relates directly to the maximum temperature of quantum structures, as explained a little later. Since the temperature of water involves distributed velocity far below the distributed speed of light, the value of the temp unit is very low.

\begin{equation}\label{distvel}31.534{\left( {\frac{m}{{sec}}} \right)^2} = 3.509 \times {10^{ - 16}}temp \end{equation}

The temperature scale at the macro level of our human existence depends upon the relative velocities of molecules, which are of a more complex order of existence than subatomic particles. The reason that seemingly unrelated temperature units developed within physics are due to this complexity disparity between macro and quantum existence. Further research must determine the scale factors between the various levels of complexity. For now, we will refer to the result of equation (\ref{distvel}) as “distributed velocity.”

The average distributed velocity of the water directly relates to the specific volume and average pressure of the water.

\begin{equation}vel{c^2} = spcv \cdot pres \end{equation}

Empirically, we know the specific volume of water is equal to $0.01602\frac{{f{t^3}}}{{lb}}$, which in quantum measurement units equals $63.781spcv$. Since we now have the average distributed velocity and specific volume of the water, we can determine the average pressure:

\begin{equation}\frac{{3.509 \times {{10}^{ - 16}}vel{c^2}}}{{63.781spcv}} = 5.589 \times {10^{ - 18}}pres = 3.204 \times {10^4}Pa \end{equation}

Distributed velocity also relates to resonance in acoustics. According to standard physics, the resonance of a vibrating string is equal to:

\begin{equation}F = \frac{1}{{2L}}\sqrt {\frac{T}{\rho }} \end{equation}

where $F$ is the “resonant frequency”, $L$ is the length of the string, $T$ is the force applied to the string, and $\rho$ is the density of the string.[7] Once again, it is obvious that resonance is not dependent upon the square root of force and density. The quantum measurement units expression for the resonance of a string is:

\begin{equation}.25\times rson = \frac{{forc}}{{4leng^{2} \cdot rbnd}} \end{equation}

Where ${rbnd}$ (rebound) is the unit equal to mass per length in the Aether Physics Model. Mass per length is also equal to line density. Rebound measures the strength for which an object with mass will reflect off an inelastic surface. The greater the mass per length, the more intense the rebound. The above equation is, therefore, the equation of quarter-wave resonance.

Since we are dealing with resonance, two orthogonal frequencies are involved: a wave of string traveling a velocity in one direction and a wave traveling in the opposite direction. In the fundamental quarter resonance, there is a one-half cycle between the ends of the string moving in one direction and a one-half cycle moving in the opposite direction, which is inversely proportional to one-quarter of the total distributed wavelength.

\begin{equation}\frac{{rson}}{4} = \frac{{vel{c^2}}}{{4 \cdot len{g^2}}} \end{equation}

The distributed velocity of the string depends upon the physical properties of the string and its environment.

It is clear that where equations show resonance as equal to the square root of measurements, they should express instead as distributed frequency. Although such a change may meet initial resistance, it is essential to simplify physics by making it consistent throughout. We must get used to saying, “The resonance of an electrical circuit is equal to x [frequency unit] squared.”

### Frequency

### ILFUA1

### ILFUA2

### Field Intensity

Field intensity (fint) is the general intensity of a field.

### ILFUA4

### ILFUA5

### Bending Radius

\begin{equation}magr=mfld\cdot bndr \end{equation}

See Magnetic Rigidity at the following link: https://uspas.fnal.gov/materials/12MSU/xverse_dynamics.pdf

### ILFUA7

### ILFUA8

### Wave Number

### Orbit

### Time

## Length Frequency Units B

### OLFUB1

### OLFUB2

### Volume-Time

### OLFUB4

### OLFUB5

### Active Area

### OLFUB7

### OLFUB8

### Dynamic Length

### ILFUB1

### Volumetric Resonance

A Helmholtz resonator can be considered an example of resonance per volume. In the context of acoustics, a Helmholtz resonator consists of a cavity or volume of air connected to the surrounding environment through a small neck or opening. The resonant frequency of a Helmholtz resonator is determined by its volume and the dimensions of the neck.

A Helmholtz resonator's resonance (frequency squared) is inversely proportional to its volume. This means that changing the volume of the resonator will result in a change in its resonance. By altering the volume of the cavity, the resonance can be adjusted to achieve desired acoustic properties.

### Volumetric Wave

Volumetric wave, or frequency per volume, measures how often an event or occurrence happens within a specific volume or space. It is a ratio representing the number of times an event happens per unit volume. The specific meaning of "frequency per volume" can vary depending on the context in which it is used. For example, in the field of physics, it can refer to the collisional frequency of particles within a given volume. In the context of exercise or training, it can refer to the frequency of weekly muscle training sessions, given a specific training volume.

### ILFUB4

### Transverse Resonance

A resonating metal sheet can be considered an example of resonance per area. When a metal sheet is subjected to vibrations or oscillations at its resonance (frequency squared), it can create standing waves on its surface. These standing waves can cause loose surface particles, such as sand or powder, to move and align in specific geometric patterns known as Chladni patterns.

The resonance of the metal sheet is determined by its dimensions, material properties, and boundary conditions. By adjusting these factors, the resonance can be tuned to achieve desired effects.

In this context, "resonance per area" refers to the resonance occurring over the surface area of the metal sheet. The specific patterns formed by the loose particles are influenced by the distribution of the vibrational energy across the sheet's surface.

### Transverse Wave

Transverse wave, or frequency per area, refers to measuring the occurrence or density of a particular event or phenomenon within a given area. It quantifies how often a specific event or phenomenon happens in a specific spatial region. In this context, " frequency " typically refers to the number of occurrences or events, while "area" refers to the spatial extent or size of the region being considered. Calculating the frequency per unit area makes it possible to compare and analyze the spatial distribution or concentration of events or phenomena across different regions.

### ILFUB7

### Scalar Resonance

Scalar resonance is resonance (frequency squared) per linear path. The resonance of a guitar string is an example of scalar resonance.

### Scalar Wave

Contrary to mainstream views, a scalar wave is a longitudinal wave displacing a medium in its travel direction. Sound and ocean tsunamis are examples of scalar waves.

### Q Factor

A coil's so-called “Q factor” indicates the “sharpness” of a resonance curve. The Q factor is a dimensionless value derived from the following formula:

\begin{equation}\label{Qfactor}Q = \frac{{\omega L}}{R} \end{equation}

where $\omega $ is the frequency, $L$ is the inductance, and $R$ is the resistance. In the APM, the unit represented by $R$ is actually magnetic flux. The magnetic flux measures the coil’s reactance, not its resistance. In the APM, equation (\ref{Qfactor}) expresses as:

\begin{equation}Q=\frac{freq\cdot indc}{mflx} \end{equation}

Q is the value where magnetic flux is measured as reactance instead of resistance.

The Aether Physics Model shows there is a balance between matter and environment and that minimizing the eddy current in the coil results in sharper resonance. An identity arises from equations (\ref{potnindc}) and (\ref{currcapc}):

\begin{equation}\frac{{potn}}{{indc}} = \frac{{curr}}{{capc \cdot h}} \end{equation}

We can transpose the identity such that:

\begin{equation}\label{eddy}\frac{{potn \cdot h}}{{curr}} = \frac{{indc}}{{capc}} \end{equation}

The value of $h$ is Planck’s constant. The potential, current, and Planck’s constant are characteristics of the electron (matter), and inductance, and capacitance are characteristics of the Aether (environment). Each side of equation (\ref{eddy}) quantifies eddy current:

\begin{equation}\begin{array}{l}\frac{{potn \cdot h}}{{curr}} = eddy \\ \frac{{indc}}{{capc}} = eddy \\ \end{array} \end{equation}

Minimizing the eddy current by changing the coil's material and environmental characteristics increases the resonance's sharpness.

## Natural Log

John Neiby observed an interesting curiosity while investigating the Aether Physics Model. He noted that the square of the natural log could approximately express the magnetic charge, electrostatic charge, electron fine structure, and $\pi$.

\begin{equation}\left( {1 + a} \right)\frac{{{e_{emax}}}}{e}\pi = {\left( {\log e} \right)^2} \end{equation}

[1A] Grundmann, S., Trabert, D., Fehre, K., Strenger, N., Pier, A., Kaiser, L., Kircher, M., Weller, M., Eckart, S., H. Schmidt, L. P., Trinter, F., Jahnke, T., Schöffler, M. S., & Dörner, R. (2020). Zeptosecond birth time delay in molecular photoionization. Science. https://www.science.org/doi/10.1126/science.abb9318

[1] Warren B. Boast Principles of Electric and Magnetic Fields (Harper & Brothers, New York, 1948) 173

[2] Warren B. Boast Principles of Electric and Magnetic Fields (Harper & Brothers, New York, 1948) 179

[3] Whitney, Cynthia Kolb, Essay 1: This is Not Einstein’s Postulate (Galilean Electrodynamics, Space Time Analysis LTD, Winter 2005) pp 43-44

[6] A Course in Electrical Engineering Volume II - Alternating Currents, McGraw Hill Book Company, Inc., 1947 pg 259

[7] "Electromagnetic Radiation ," The Columbia Encyclopedia , 6th ed.